0
There are several ways. One of them is to use software such as tweak, all kinds of optimization software (for instance jv16) which are able to clean the registry and do defragmentation of it. Also you need to defragment all your hard drives periodically (once per month or more often depending on how often you modify/copy/delete data).
You can use also hardware tricks like overclocking. Also to make an upgrade might a good idea if your computer is rather old or lacking power. You might need to add some RAM, replace the system hard drive with a drive with better performance. You might consider upgrading the CPU (if the motherboard supports newer CPUs). Also the video card might cause some discomfort especially if you are working under Vista.
How_it_could_enhance_the_processing_capability_of_typical_destop_computer
Wiki User
∙ 11y ago
You can enhance the capability of a microprocessor by increasing the clock speed, adding more cores, improving the architecture for better efficiency, or incorporating advanced technologies such as hyper-threading or cache memory optimization. Additionally, optimizing the software running on the processor to better utilize its resources can also enhance its performance.
Add your answer:
Earn +20 pts
First word processor for micro computer is?
WordStar is often considered the first widely used word processor for microcomputers. It was released in the late 1970s and became popular among users of early personal computers.
Highest priority interrupt in micro processor?
The highest priority interrupt in a microprocessor is usually the reset interrupt. When a reset occurs, the microprocessor is forced to stop its current operations and begin executing the reset routine. This is critical for initializing the processor and setting it to a known state before starting normal operations.
What is microoperation?
Microoperations are fundamental operations that can be performed by a digital computer's control unit at a very basic level, usually involving simple data manipulation or transfer tasks. These operations form the building blocks for more complex instructions and tasks executed by a computer's central processing unit (CPU). They are essential for controlling the flow of data and instructions within a computer's architecture.
What is the main limitation of micro teaching?
One main limitation of micro teaching is that it may not fully simulate the complexities and challenges of real classroom teaching, such as managing behavior issues or addressing varying student needs. Additionally, there may be limitations in the transferability of skills learned in micro teaching to actual teaching situations.
What the benefits of micro teaching to teacher's education?
Micro teaching allows teachers to practice and receive feedback on specific teaching skills in a controlled environment. It helps teachers refine their instructional techniques, improve lesson delivery, and build confidence in their abilities. Additionally, micro teaching can promote reflection and lead to more effective teaching practices in the classroom.
What is latest micro processor?
what is name of latest micro processor in computer hardware in india
How micro controller differs from micro processor?
micro controller contain system on chip memory, timers,counters where as a micro processor doesn't contain all these
Why micro processor is called micro processor?
Because the printed circuits are so small that you need a microscope to see them.
What is the type of electronic stage that isolates the stages inside a micro-processor from those outside the micro-processor is the?
Ram
Give difference between micro controller and micro processor in terms of architecture?
no answer
Who invented the micro processor?
Gary Boone
What do you understand by programming model of a microprocessor?
Micro-Processor programming model refers to the Micro-Processor system as seen by a programmer. It involves the following: The Instruction Set - The Micro-Processor internal Registers - The way Micro-Processor accesses the memory (Addressing - Mode): Micro-Processor 'Fetches' (reads) an instruction from memory, 'Decodes' (interprets) the instruction, and then 'Executes' (carries out the task) the instruction. It repeats the cycle for next instruction. By Fijabi Isaac M. Tech Computer Sc.
What is a chip that runs a PC's unit?
It is called a micro-processor......a processor on a single chip
When was the first micro processor developed?
In 1971 by Intel
Highest priority interrupt in micro processor?
The highest priority interrupt in a microprocessor is usually the reset interrupt. When a reset occurs, the microprocessor is forced to stop its current operations and begin executing the reset routine. This is critical for initializing the processor and setting it to a known state before starting normal operations.
Give the name of a processor produced by mortorola?
the first name of the micro processor Motorola M6800
Who invented micro processor?
Gordan Moore and Robert Noyce
