0
In terms of joules, the answer is 216,000 joules.
First, you must convert 1 hour to seconds.
1 hr = 60 mins
60 mins = 3,600 seconds
The formula for finding power can also be used to find work if power and time are provided.
Power = Work/Time
60 watts =work/3,600 seconds
To find this, multiply 3,600 by 60
3,600 X 60 = 216,000
The unit for work is joules, so the answer is 216,000 joules.use the power formula
Wiki User
∙ 8y ago
Anonymous
216
Add your answer:
Earn +20 pts
How might life be if Thomas Edison did not invent the light bulb?
Without the light bulb life would be miserable because we would not only have no light but no energy also because Thomas Edison invented the light bulb and electricity so no light bulb, no Edison, meaning no electricity. enjoy Cameron6574 ;P What i just said was gobbledegoosh (gob-ol-dee-goosh). Thomas Edison invented the computer and electricity never existed. The light bulb - what even is a light bulb? A remote? A rat? A train? You can't even describe it and the bell just rang so the monkies. NumberWang!
Can you wire your 220v pendent light into a 110v system and just change the bulb to a 110v bulb?
If the lamp bases are the same for a 220 volt bulb and a 110 volt bulb, then yes. If any modification to the pendent lamp have to be done then no, as field modifications to electrical equipment will null and void the certification that the manufacturer had to obtain to be able to sell the device.
What was the importance of the first light bulb?
For thousands of years there was no lights at night. Today we have never lived that way, but imagine if you want to go someplace and there are no lights. People had accidents because they went into a ditch or off a bridge. Sports and activity couldn't be done because of no lights. Houses had to use candles, fireplaces,,or gas lamps for light and furniture had to be placed so people didn't bunp into it if they got up. That is why the light bulb is important.
How far should you put a 100 watt light bulb away from a plant?
What has to be done is to judge the temperature of the heat emitted by the light bulb. This temperature should be adjusted by the distance from the bulb to the plant. As long as the leaves do not get hot and burn then this should be considered a proper distance. The key is not to damage the leaves.
What is the risk of using a 100 watt light bulb in fixtures that are rated for 75 watt bulbs only?
All light bulbs are safe to use. They have under gone underwriters safety tests before that can be sold by the manufacturer on the open market. The reason that people use different size lamps is because of the difference in costs of operating the lamp. Remember the higher the wattage the higher you will pay for operational costs. Using a smaller lamp in a specifically rated fixture will cut down on the amount of heat that the fixture will have to undertake, but there again the fixture has been certified for the amount of wattage that is shown on the fixture's label on the amount of wattage that the fixture can handle. With that out of the way using a 40 watt light bulb in a 60 watt rated light fixture is safer than using a 100 watt light bulb in a 60 watt rated light fixture. Using a 100 bulb in a fixture rated for 60 watts is dangerous. A 100 watt light bulb gets hot enough to deform or melt some of the components of the lamp socket and may cause a fire. It may be difficult to remove from some plastic sockets after it has been heated up and melted to the base of the bulb. A fixture rated for 100 watts usually has a ceramic socket.
How do you do the light bulb on Habbo?
The light bulb is done by holding alt on your keyboard and pressing the numbers 276.
How much work is done using a Watt light bulb for 1 hour?
The energy used (work done, same thing) is 120 watt-hours, which is also 0.12 units or 120x3600 joules.
What was done before the light bulb was invented?
Oil lamps where used. Candles were also used.
How do you remove a brake light bulb on a F-150?
There are some squares in the back when you drop the tailgate then pull out when it comes out twist the bulb housing and it should come out pull the bulb out and you are done.
How many lemons does it take to make a light bulb light?
it takes 3,003,494,560,327,650,836,140,520,347,257,345,803,465,876,324,065,086,237,248 and it still might not get done
How many drummers does it take to screw in a light bulb?
three. one to screw in the bulb and two to talk about how much better neil peart could have done it.
How many cats are in a light bulb?
NONE!!!! to mum! this WAS done by daisy amber *insert last name*
How might life be if Thomas Edison did not invent the light bulb?
Without the light bulb life would be miserable because we would not only have no light but no energy also because Thomas Edison invented the light bulb and electricity so no light bulb, no Edison, meaning no electricity. enjoy Cameron6574 ;P What i just said was gobbledegoosh (gob-ol-dee-goosh). Thomas Edison invented the computer and electricity never existed. The light bulb - what even is a light bulb? A remote? A rat? A train? You can't even describe it and the bell just rang so the monkies. NumberWang!
How do you replace the front headlight bulb on a Mitsubishi galant es?
This question did not specify a year, as for the 2000 Galant ES it's fairly simple. You will need a flat head screw driver to remove the light bulb connector from the light bulb. The light bulb is held to the connector with a locking tab, you will need to use the screw driver to free the bulb from the locking tab on connector. Once free you can just pull the light bulb from the rubber housing. Replace with new bulb making sure you do not touch light bulb glass with hands (the grease of your hands sometimes shortens the lifespan of the bulb) snap in connector and you're done.
How do you replace license plate light bulb on 2008 Honda Odyssey?
05+ Honda Odyssey license plate lights. Pop out the license plate lights in the rear. There are two of them. Use a very thin flathead screw driver and pop out the sides of the inner clear light assembly. They are on the sides. Once that is done, remove the light bulb and replace with a new bulb. Pop in the clear light assembly cover. Turn on lights to see if the bulb is working and it is is then you're done. Approximately 10-15 minutes total.
Who created light bulb watts?
Thomas Edison invented the vacuum sealed filiment light bulb. James Watt coined the term "watt" as the work done by an electrical circuit, which can be calculated as Volts multiplied by Amps.
The work done to move one electron in a light bulb is very small?
Yes it is small, but the power is large.
