0
flat
ring type
spiral wound
comproffile
Gonzalo Koch
Add your answer:
Earn +20 pts
What is suitable gasket material type for LPG?
Metallic Gasket
What is the difference between a bad gasket and bad head gasket?
A head gasket is only one of the many gaskets in the engine. Each has a separate function and failure by any one gasket will result in different type of leakage. A head gasket failure is perhaps the most disruptive.
What is CAF gasket?
Type your answer here... CAF gasket refers to Compressed asbestos fibre gasket. This gasket is carcinogenic and hence industries have started to reduce this material.
Do you need any type of glue when installing a gasket on a urinal?
No, you don't if the gasket is rubber.
What are the different type of gasket?
Flat washers. Spring washers. Rubber gasket. Felt washers. Asbestos gaskets.
What is the temperature of a car engine near the gasket area generally for any type of gasket?
From 185 to 265 degrees Fahrenheit.
Can you use an head gasket sealant to fix a blown head gasket?
NO! These type products are only an emergency repair. The only permanent repair is to remove and replace the blown gasket. Besides these type products can cause clogging of the cooling system. Do not use them.
My cars oil and coolant are mixing on my 95 grand prix gtp i no it needs some type of gasket but im dont no what gasket.?
head gasket - means major over haul
Where is the upper intake gasket on a 2001 Chevy blazer?
It is between the upper and lower intake manifold. The gasket is an o-ring type.
Do you need gasket glue to change a valve cover gasket or is the new gasket enough itself Why then does gasket glue exist?
Sometimes yes, sometimes no. It depends on - A) what type of engine and B) what type of gasket. Older cars mainly used cork gaskets, so gasket sealant was a wise choice. New engines use rubber, some with metal bushings or spacers, so the typical "blue glue" as daddy used to call it isn't required.
What type of seal do you use to re-seal the cylinder jog to the crank shaft housing There is no gasket only what appears to be a type of glue?
Depending on the exact engine there may be a gasket for it. If not it may be a sealant like gasket goo. -I am unclear on that term 'cylinder jog'. but most crankshaft bearing surfaces should have a gasket, rather than a sealant.
What is the average price of a rubber gasket?
This will depend on what type of gasket you need and what it is for. I came up with .44 cents as an average starting price. www.gasketstogo.com
