0
3
Roxane Bode
Add your answer:
Earn +20 pts
How many terminals does a two way lighting switch have?
3
Intermediate switch layout?
The strappers from each two way switch go to the four way switch. The strappers from one switch go to terminals 1 & 2, the other two go to terminals 3 & 4.
How many terminals does a one way lighting switch have?
Two, and possibly a ground. The ground will be clearly marked with a green colored screw.
How many hot terminals are there on a 3-way light switch?
No good way to answer this. A 3-way light switch has one wire coming to it, two wires run to the second switch and one back out of the second switch to the light. At any point, any one of the terminals may be "hot". The only one always hot is the first single terminal that is the power source.
How can you tell if the switch that you have is a 3 way or not?
3 way switches have 3 terminals. A common on and off switch only has 2.
How many terminals does a two way lighting switch have?
3
Intermediate switch layout?
The strappers from each two way switch go to the four way switch. The strappers from one switch go to terminals 1 & 2, the other two go to terminals 3 & 4.
How many terminals does a one way lighting switch have?
Two, and possibly a ground. The ground will be clearly marked with a green colored screw.
How many hot terminals are there on a 3-way light switch?
No good way to answer this. A 3-way light switch has one wire coming to it, two wires run to the second switch and one back out of the second switch to the light. At any point, any one of the terminals may be "hot". The only one always hot is the first single terminal that is the power source.
How many terminal does an intermediate way lighting switch have?
An intermediate or 4 way light switch has 4 terminals + 1 ground terminal.
How do you do staircase wiring?
A two way switch is required for staircase wiring. A staircase switch will have two terminals. Connect the line wire with the center terminal. Connect the two ends of a wire with the top two terminals and two ends of a wire with the bottom two terminals. The line wire at the center terminal can now be connected with one terminal of the light bulb or light holder.
How can you tell if the switch that you have is a 3 way or not?
3 way switches have 3 terminals. A common on and off switch only has 2.
When installing lights with 2-way and intermediate switching control the intermediate switch must be connected to the?
to wire a lamp to be controlled from three places you need two three way switches and one four way switch. the two traveller wires that would normally run between the two three way switches must be connected to the terminals of the four way switch
What is a intermediate switch?
An intermediate switch is a switch of 4 terminals which is used to control devices from more than 2 locations. If you want to control a device (eg. lamp) from one location you use a normal switch, you could see two terminals behind it. If you want to control from two locations you use a 2-way switch (3-way in American vocabulary), you could see three terminals behind it. But if you want the device to be controlled from more locations, you need to use what is called the "Intermediate Switch". It is to be used in conjunction with other 2-way or intermediate switches. Technically speaking, an intermediate switch is similar in structure to a Double Pole Double Throw (DPDT) with the throw contacts of a pole is interconnected to that of the other pole. Consider the stairs of a G+2 storey building. You usually have three switches -one on Ground floor, second switch on the first floor and the third on the second floor, isn't it? You need to turn-on & off the light from all locations. Then, you need to use an intermediate switch in between two 2-way switches (Can also use all three intermediate if economy doesn't matter). If you require switches in 5 locations, go for two 2-way switches in the first and last points and three intermediate switches in the rest of the locations. In each intermediate switch you could see two sets of terminals. The two wires coming from one direction is connected to one set of terminals and new two wires are connected to the other two terminals and taken to the next switch in line. Also see section 5 of http://en.wikipedia.org/wiki/Switch
What is the function of the intermediate switches?
An intermediate switch is a switch of 4 terminals which is used to control devices from more than 2 locations. If you want to control a device (eg. lamp) from one location you use a normal switch, you could see two terminals behind it. If you want to control from two locations you use a 2-way switch (3-way in American vocabulary), you could see three terminals behind it. But if you want the device to be controlled from more locations, you need to use what is called the "Intermediate Switch". It is to be used in conjunction with other 2-way or intermediate switches. Technically speaking, an intermediate switch is similar in structure to a Double Pole Double Throw (DPDT) with the throw contacts of a pole is interconnected to that of the other pole. Consider the stairs of a G+2 storey building. You usually have three switches -one on Ground floor, second switch on the first floor and the third on the second floor, isn't it? You need to turn-on & off the light from all locations. Then, you need to use an intermediate switch in between two 2-way switches (Can also use all three intermediate if economy doesn't matter). If you require switches in 5 locations, go for two 2-way switches in the first and last points and three intermediate switches in the rest of the locations. In each intermediate switch you could see two sets of terminals. The two wires coming from one direction is connected to one set of terminals and new two wires are connected to the other two terminals and taken to the next switch in line
What does com mean on a light switch?
In a situation where there is only one switch controlling the light or lights you normally use a spst (single pole single throw) switch that has only two connection terminals. This type of switch either connects or disconnects the two wires that are connected to the switch's terminals depending upon the position if the switch lever. The com terminal on a light switch means that it is a three way or the kind of switch used where there are two or more switches that controll the same light or lights. The three way switch is a spdt ( single pole double throw) . If you look closely you will find this designation somewhere on the switch. On the spdt switch you have three terminals, a common and two branches. In one postiion the common connects to one branch and in the second position the common connects to the other branch. If you are trying to install this switch in a situation where there is more than one switch controlling the light you must have the ability to correctly identify the common wire; if you can't do that you need help from someone who can do that correctly.
What are the disadvantages of a two way switch?
What is Disadvantages of two way switch
