1.5L = 1500ml
17.5 X 1500 / 100 =
262.5ml
50 Liters of the 60% solution.
50 ml
25
Diluted Ammonia solution can be prepared by diluted strong ammonia solution with the appropriate quantity of purified water.
Mix this 50% solution in equal quantities with water(?) to halve it's strength. So use 1 litre of the 50% solution and 1 litre of water of that's what you are diluting it with.
To prepare 6 nM ammonium hydroxide a 30 percent solution you need to know the volume of the 30 percent solution that you have and the volume of 6nM solution you would like to make. Then use the following formula: C1V1 = C2V2 where C = concentration in moles/Liter and V = volume in liters.
684 ml
When 1 liter is 100 percent, then 0.015 liter (15 ml) is 1.5 percent
(X gal)(0.15) = (1 gal)(0.025)0.15X = 0.025X = 0.17 gallons (4 quarts/1 gal.)(1 liter/1.06 quarts)(1000 ml/1 liter)= 642 milliliters============
Weigh 60 grams of Glacial Acetic acid into a 1 liter volumetric flask. Make up to the 1 liter mark with distilled water. There is now a 6% (w/v) solution.
Your question doesn't have a single answer. In Chemistry solution strength is usually calculated in moles pe liter of mole per kilogram or as a mole fraction ( moles per mole) but can also be mass per liter, mass per mass, volume per volume, percent by mass, or percent by volume.
Add 10 g to a volumetric flask and make up to the 1 liter mark.