answersLogoWhite

0


Best Answer

With the car turned off, hold down the RCL button.

While holding down the RCL button use either the AUTO/TONE or TUNE/SEEK button to change the time depending on the model of your radio. The left side will change the hours... the right will change the minutes.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar
User Avatar

Scot Thomson

Lvl 1
11mo ago
What if that doesn't work? What could be the problem?
More answers
User Avatar

Wiki User

8y ago

On the clock there are two small indented buttons next to the display one is for hours the other for minutes. You will need a pen or the tip of a key to push the buttons

if like mine ....push and hold the clock button until the hour flashes , then turn the volume knob to desired hour, hit the set button again , the minutes should flash , turn volume knob to desired minutes , hit clock button again

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

go to eBay n look for an owners manual, or go to a nearby salvage yard n look through all the wrecked trucks to find an owners manual. that's what i did to get the fuse panel for my boyfriends truck.

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

If its the factory unit, look at the face of the unit and there should be 2 tiny little buttons (holes) on the front. One has an H (hours) next to it and one has an M (minutes). Use a paper clip or a pen and adjust the time.

This answer is:
User Avatar

User Avatar

Terrence Dozer Brewe...

Lvl 2
2y ago

I had clock reset to correct time in 15 seconds, they knew their stuff .! Thank You Answers.. "DoZer"...

This answer is:
User Avatar

User Avatar

Wiki User

8y ago

Well, if it is like my 2002 Ford Windstar, you press and hold the clock button and use the seek and tune buttons to change the hours and minutes.

This answer is:
User Avatar

User Avatar

Wiki User

17y ago

unpluged te batery at 12:00 and conect it again. the clock will start a the rigt time. good luck!!!! ^_^ .

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

turn on ignition press right hand button on speedo for more than 3sec hours will flash press to change release button for 5 secs minutes will flash change minutes

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you set the clock on a 1999 Ford Mustang?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is different about a 1999 Ford Mustang GT that gives it more HP than a 1997 Ford Mustang GT?

There should be no difference The difference between the two are the different set of heads and intake used on the 1999 that was not used on the 1997.


How do you set the distributor for Ford Mustang 2300?

How do you set the timing on a 2300 mustang


How do you set the clock on a 1999 Ford Ranger XLT?

If your radio has a "clock" button press and hold it while using the up/down tuner( or volume, i forget) button to set the time.


How do you set the clock on a 2003 Ford Escape?

You can set the clock in your 2003 Ford Escape by holding in the volume button. With the volume button held in the clock display will flash. You can then set the clock by turning the tuning knob.


How do you set the clock in a 2011 Ford F-150?

how do you set clock In 2011 f150


How do you set the clock in a 2002 Chevy Cavalier?

How do youchange the clock on a 2002 zx2 ford escort?


How do you set clock in 2011 Ford Focus E?

Press clock, type digits then ok


What should the spark plugs be set on for a 1986 Ford Mustang 5.0?

.050 inch spark plug gap - 1986 Ford Mustang 5.0 L ( 302 )


How do you set the clock on the radio of a 2003 ford f-250?

hold clock+seek for Hours hold clock+discs for minutes


How to set timing on 1999 Ford Expedition?

how do you set or check the timing on a 99 ford expedition?


Does a 1999 crown Victoria have independent rear suspension?

no. It's a live-rear axle set-up like the Ford Mustang. The is no Crown Victoria ever built for public consumption with an IRS.


How do you set the clock on a Ford Escape?

hold clock button and use the seek or other button underneath while holding the clock button