Sand and chalk can be separated through the centrifugal process. A centrifuge makes high speed cycles and the materials of different densities will be separated.
Filtration would separate the water, leaving the chalk particles behind.
Filtration would separate the water, leaving the chalk particles behind.
Blackboards are not scratched by chalk because chalk is softer than the material from which the blackboard is constructed. Sand scratches blackboards because it is harder than the material from which a blackboard is made.
Sublimation
it will get on the iron if you try to separate sand will be on the iron
First remove iron filings with a magnet. That leaves sand, salt and chalk dust. Add water which dissolves the salt, and filter leaving the sand and chalk dust on the filter paper. Put that back in water and add acid to dissolve the chalk dust (CaCO3) leaving the sand as a solid. Filter to obtain the sand. The chalk dust will now be in the acid as CO2 and H2O and the Ca salt of the acid.
The hardness of sand is higher.
Due to the chemical composition of Chalk, you can separate it from water either by filtration of evaporation.
Filtration would separate the water, leaving the chalk particles behind.
Filtration would separate the water, leaving the chalk particles behind.
Blackboards are not scratched by chalk because chalk is softer than the material from which the blackboard is constructed. Sand scratches blackboards because it is harder than the material from which a blackboard is made.
we can separate sand by decanting
You can add water to this mixture, which will dissolve the salt but not the chalk. Decant the water, then boil it away, and you will be left with salt.Salt is much more soluble in water than chalk is.
you dont.
please HELP
by the process of SUBLIMATION.....
kj