Behind the glove box, remove the screw a the right of the glove box and pull gently.
Take it to the dealer.
how to remove my glove box
Remove the glove box and its behind that
how to remove glove box in 1993 camry
tire pressure....reset in glove box
Shinny metal box behind the glove box. Glove box door need only to remove to gain access to PCM.
Assuming it's the same as a 94 C1500, Open the glove-box, remove the screws across the top and bottom, remove the cables that support the glove-box door, remove the glove box door, remove the glove box compartment. I have a 95 K1500, you just have to squeeze the top of the glove box, clear the mount and then remove the plastic strap on the left side, and then open the glove box fully it just fall down, no need to unscrew anything.
passenger side under glove box...you don't have to remove glove box to get to it...generation vibe forum has clear photos
above the glove box behind the dash pad remove the glove box and look up in the dash you will see it
To remove the glove box from an S10 pickup, first, open the glove box and remove any contents. Next, locate the screws or bolts securing the glove box hinge and the stops; these are typically found on the sides and bottom of the glove box. Remove these fasteners using a screwdriver or socket wrench, then gently pull the glove box out of its mounting brackets. Be cautious of any wiring or clips attached to the glove box and disconnect them if necessary.
Open the glove box. Remove the damper from the glove box then let the glove box hang down. Remove the dust and pollen filter assembly from the evaporator case. Remove the filter from the housing, and replace the filter. Install the filter in the reverse order of removal. Make sure that there is no air leaking out of the evaporator.