answersLogoWhite

0


Best Answer

pull the distributer out then usuing a tool and drill reach down in that hole and spin the drive shaft of the oil pump.,

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you prime oil pump on an installed Pontiac 400?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Is 1969 Pontiac 400 water pump compatible with 1967 Pontiac 400?

yes


How do you change a Pontiac 400 oil pump?

Good question. I'm looking for a way to prime the pump before initial start-up of a Pontiac 350 that has sat for years. If, I were to have to change the pump, I would be looking at safely removing the oil pan, first


How do you tell the difference between a Chevy 400 and a Pontiac 400?

Many ways. Pontiac 400 has a cast aluminum timing cover, that mounts the water pump directly on it, Chevy 400 has a stamped steel timing cover, water pump mounts to the block. Pontic 400 has fuel pump on the drivers side, Chevy is on passenger side. Pontiac has a separate valley cover below the intake manifold, Chevy intake IS the valley cover. Pontiac distributor does not go through the intake manifold, Chevy does. Pontiac has 10 head bolts per side, Chevy has 17. Pontiac has long exhaust ports that bend 90 degrees from the side of the cylinder head, Chevy exhaust ports end at the face of the cylinder head. Pontiac spark plugs are above the exhaust manifolds, Chevy is below. Pontiac 400 is physically larger than the small block Chevy 400 also.


Where can information for a Pontiac 400 be found?

Information on the Pontiac 400 can be found on Wikipedia. The 400 refers to the type of engine that is present in the car. Pontiac began production in 1926.


How do you wire a starter for a Pontiac 400 engine?

where do the wires on the starter go on a 1977 pontiac 400


You have the belt set up from a 1968 Pontiac Bonneville with a 400 engine was replaced with a 1973 Pontiac grand ville with a 455 The water pump shaft is too long and the pulleys do not line up what?

you probibly need to change the water pump to a newer year. there is no difference between the 400 and the 455 besides the year. if you use the pump for the 455 it should work or go to the salvage yard and get pully setup for the 455.


What is max rpm to 1969 Pontiac 400 YT code?

Rpm Red line 1968 Pontiac firebird 400 HO


Mutliplied two prime numbers to get 400?

Mutliplied two prime numbers to get 400?


What are the prime factorization of 400?

The prime numbers (factors) of 400 are: 2 and 5


What is the plug gap on a Pontiac 400?

.035


What is the rotation direction 400 Pontiac?

Clockwise


What are two prime numbers that equal 400?

There is only one number that equals 400. The number is 400, and it's not a prime number.