answersLogoWhite

0


Best Answer

It will start sometimes, seemingly only when it wants to, and the most telling symptom will be no reverse lights.

Most likely not bad, just dirty.

On the passengers side of the trans about even with the front of the door fan shaped switch held on by two bolts.

I suggest taking it apart and cleaning it before you think about replacing.

The switch is nearly $300

To remove, flatten out the retaining washer side under nut, remove large nut, remove smaller ( 14mm ) bolt on the adjustment side.

cleaning is easy, 6 screws in back, pull apart, clean out all that old grease, pay special attention to the two contacts on the sweeper arm, they should move in and out easily as they have springs underneath and are the man contacts, apply new di-electric grease and reassemble.

reassemble and align before tightening, easiest way is to put trans selector in R and move switch until reverse lights come on.

User Avatar

Wiki User

13y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you know when your neutral safety switch is bad on jeep cheerokie?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the safety neutral switch on a 1995 Jeep Cherokee 5-speed transmission and Where is the safety neutral switch located?

How do you replace the safety neutral switch on a 1995 Jeep Cherokee 5-speed transmission and Where is the safety neutral switch located?


How do you replace a neutral safety switch on a 1992 Jeep Cherokee Laredo?

go to www.naxja.org or www.jeepforum.com and do a search for "neutral safety switch. There will be links to jeep owners sites that have detailed instructions


Were is the clutch safety switch on a 1998 jeep wrangler?

The neutral safety switch is located on the transmission, passengers side.


Safety neutral switch on jeep Laredo?

on the right side of the trans


How do you repair a neutral safety switch on a 1995 Jeep Cherokee?

The neutral safety switch and backup light switch are one in the same. You have to replace it. It is located on the transmission where the shifter connects to it.


Jeep wont start in park or neutral COULD IT BE A NEUTRAL SAFETY SWITCH?

Yes, this is possible.


1994 Jeep won't turn over?

check PNP switch (neutral safety switch)


Where is the neutral safety switch on a 06 jeep?

It is inside the transmission, on the valve body.


1988 jeep wrangler Sahara 6cly 5 spd where is the neutral safety switch located?

Std. transmission would not have a neutral safety switch - if anything it would have a clutch safety switch located usually at the top of the clutch pedal


When removing the Neutral safety Switch on a Jeep Cherokee does the trans have to be in Neutral?

Here's a great write up on Neutral Safety Switches in Cherokees http://www.jeepin.com/features/nss/index.asp


Where is the neutral safety switch on a 1995 Jeep Cherokee Country?

either behind or in front of the arm of your brake pedal. Follow the brake pedal up until you find a box, either in front of or behind the brake pedal. You will find that the box has a button on it that is activated by your brake pedal, that is the neutral safety switch.


What does a neutral safety switch do 1998 Jeep Grand Cherokee?

It only allows starting in park and neutral and it turns on the reverse lights.