0
I just got finished doing this. There should be 3 prongs on the switch. The way I did it you need to run 4 wires, 3 to the toggle switch, one from the ground of the fan, to the ground wire of the battery. After that you need to ground the switch(there will be an etching/sticker that tells you which is which on the switch). Run a wire from positive from the battery to the switch. Make sure you install an inline fuse, 25 amps should be good. After that run another positive from the remaining prong, to the fan, and things should starts spinning and blowing air. Good luck.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you wire a rocker switch to radiator fan on a Grand Am?
to shut the fans on and off by yourself. remove the connector for the wires at the fan. hook a wire from the positive on fan motor to the inside toggle switch, do not hook to switch yet. run a wire from the positive on battery, hook to battery after hooking up switch. hook up the wires to the switch. then the battery. its up to you if you want to install a 15 amp fuse in line from battery to toggle switch.. you can also get the power from the fuse box instead of the battery. this should work for you. if not you may need to ground the other fan wire.
Why would the cooling fans on a 91 Honda prelude si not come on?
id have to look to see why but what you can do is get new fans and hook it up to a toggle switch. when you hook the toggle switch up just flip the switch before it gets too hot
How do i wire a toggle switch for an amp?
Hook a switch up to the remote turn on and ground. Before the wiring for the amp.
How do you make bypass for vrx485vd clarion?
go to your local parts store and purchase a simple toggle switch. hook one end of the switch to a good ground and hook the wire for the parking brake from the radio to the switch. when you insert a DVD and get the blue screen turn the switch on then off then on again slowly and you will have video
Can you hook up your headlights to a toggle switch?
Yes, its not like your cars gonna blow up. Check with a local Mechanic before you do it. Love, Marybeth
How do you hook up a toggle switch on speakers?
I have the same question, I'm thinking about using electrical wire and switches to create a 3-way speaker system...
How do you bypass parking brake wire on a clarion vrx485vd?
you have to hook it up to a basic toggle switch and ground it and when you turn it on you have to flip the switch a couple times,... you cant just ground it or it will show the blue screen
How do you by pass cooling fans relays and use a toggle switch?
Take the 2 wires on the relay off and run each into the interior of the car where a suitable switch can be installed. Take the 2 leads and hook them onto the switch. Make sure you have an inline 30 amp fuse installed.
How do you hook up switch leg?
diagram to hook up switch leg
How do you remove the neutral safety switch on a mx6 Mazda 89 auto tran?
The autos do not have a safety switch....They have a sensor located in the trans itself that tells the ecu if its in neutral/park.....I believe its a 3 pin plug going into the trans itself,.....trace it and see where it leads.....You may be able to hook up a toggle switch..
What is Type of rope with a hook and toggle used to tow a gun carriage?
\pro*longe"\ (?), n. [f. see prolong.] (field artillery) a rope with a hook and a toggle, sometimes used to drag a gun carriage or to lash it to the limber, and for various other purposes.
How do you hook a toggle switch up for the cooling fan for a 1997 Pontiac Sunfire?
Let me ask you this, have you checked the related parts to the cooling fan system before going to a toggle? In most cases a switch is not an ideal solution. Sure, you can switch it on when the temps start climbing, but are you going to pay attention to switch it off again when they fall? The computer expects a certain engine temperature to be able to operate effeciently and running the engine too cool could keep the computer in cold start-up mode.The most common parts involved in the cooling fan system are the coolant temperature sensor (same sensor that feeds the computer), the fan relay, and the radiator fan itself. While it's not impossible that something else could be the problem, one of these is probably it.Answer AGAIN THIS IS NOT A GREAT IDEA BUT IMA ANSWER YOUR QUESTION ON YOUR FAN ONE WIRE IS POSITIVE AND 1 NEG CUT INTO THE POSITIVE RUN WIRE FROM + OF FAN TO INSIDE CAR HOOK TO SWITCH NOW HOOK ANOTHER WIRE TO SWITCH AND RUN TO + OF BATTERY. IF YOU GET ONLINE AND EDUCATE YOURSELF ON HOW THESE FANS WORK ITS VERY EASY TO FIX THESE MOST TIMES ITS A RELAY GONE BAD
