Wiki User
∙ 11y agoRemove the recoil then if the spring is not broken you tighten the spring (you are looking at the inside of the recoil you turn it clock wise until it is tight) line the wholes for the rope up then clamp so it won't move take a wire and hook the roap threw tie the not in the end of the make sure you have enough roap. Then put handle on the roap tie the not in the roap to hold the handle. Then unclamp the recoil and if all was done right it should work then reinstall.
Hope this helps.
Wiki User
∙ 11y agoDepends on gearing and weight, but they will run around 3600 rpm, if that helps you.
Depending on the model, 3600 - 4000 rpm top no load speed.
go to B&S site, they have all your settings and info that you need. 3600 rpm is the norm.
B&S site
36003 = 3600 x 3600 x 3600 = 46656000000
3600 3600 +1800 _____ 9000
36 percent of 3600 = 1296 36% of 3600 = 36% * 3600 = 36%/100% * 3600 = 0.36 * 3600 = 1296
There are 23 factor pairs: 3600 = 1 x 3600 3600 = 2 x 1800 3600 = 3 x 1200 3600 = 4 x 900 3600 = 5 x 720 3600 = 6 x 600 3600 = 8 x 450 3600 = 9 x 400 3600 = 10 x 360 3600 = 12 x 300 3600 = 15 x 240 3600 = 16 x 225 3600 = 18 x 200 3600 = 20 x 180 3600 = 24 x 150 3600 = 25 x 144 3600 = 30 x 120 3600 = 36 x 100 3600 = 40 x 90 3600 = 45 x 80 3600 = 48 x 75 3600 = 50 x 72 3600 = 60 x 60
3% of 3600 = 3% * 3600 = 0.03 * 3600 = 108
360% of 3600 = 360% * 3600 = 3.6 * 3600 = 12,960
2% of 3600 = 2% * 3600 = 0.02 * 3600 = 72
16% of 3600= 16% * 3600= 0.16 * 3600= 576