I have this same motor. The inside of the plate covering the electrical connections has the wiring diagrams on it.
From top to bottom, the spade posts are numbered 1 to 5 with nothing in the number 3 spot. Behind 4(to the left of it) is number 6. There is a white wire and a brown wire going to the insides of the motor.
It says for low voltage(115 I assume) it says LINE to 1 and LINE to 4 with the white from inside going to 4 and the brown going to 5.
For high voltage(220 assumed) LINE to 1 as before, LINE to 4 as before, white from inside to 5 and brown to 6.
Hope this helps.
Century Motors was bought by Heat Controller Incorporated. Try going to their contact page to see if they can get your diagram. You'll probably need to provide the motor model number. See the related link for Heat Controller, Inc.
A diagram which looks like a sankey diagram A diagram which looks like a sankey diagram
Is a diagram with the same purpose as a Venn diagram, but shaped as an H. the differences go on the left and right of the diagram while the similarities go in the middle
Diagram B Because there is no lactose present. Where is diagram B?
wye delta diagram
You don't need no @$#%& diagram. 1/4 century is simply a time span of 25 years.
No, I don't.
Spark plug diagram for '98 buck regal
Check www.autozone.com
i have a 2000 buick century and the evap comes on where and what could be setten off the evap ?
need diagram for frieghtliner century s/t 06 c-15 cat twin turbo
1,2,3,4,5,6,7
my headlights wont come on at night i changed the sensor and still not coming on
Century Motors was bought by Heat Controller Incorporated. Try going to their contact page to see if they can get your diagram. You'll probably need to provide the motor model number. See the related link for Heat Controller, Inc.
Fuse box on 1990 Buick Centur is in dshboard by glove compartment
The wiring diagram can be found at most Caterpillar diesel engine dealerships. The wiring diagram can also be found at many truck parts stores.
Pull the front cover off of it, Behind the Crankshaft balancer, The sensor is there. a diagram of how to install a creckshaft sensor.