answersLogoWhite

0


Best Answer

1. * Q06: How can I tell if my motherboard supports Ultra DMA? A06: Pentium motherboards that have the Intel TX Chipset, Pentium II motherboards starting with the Intel LX, BX and subsequent Intel Chipsets have UDMA capability. The chipset is displayed on system startup, which is called CMOS Setup. If unsure, consult system or motherboard documentation or manufacturer for chipset and UDMA performance verification.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How can you tell if your motherboard chipset supports ultra dma mode?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why nec DVD burner only works in pio mode?

You may not have the driver for your motherboard chipset properly installed. You may also have the drive configured improperly in your BIOS.


What actors and actresses appeared in Ultra Mode - 2010?

The cast of Ultra Mode - 2010 includes: Stany Coppet as himself


Why does HWiNFO32 program install a driver in kernel mode?

so the chipset doesn't fry


Why doesn't sleep mode work in vista?

Check drivers for the chipset and especially for the video card.


How do you turn off safe mode on your transform ultra phone?

how to get droid out of safe mode


What are the three modes that system BIOS can use to relate to hard drives?

LBA Mode, PIO Mode, and Ultra DMA Mode.


What might you need to disable ECP mode for parallel port?

If it's not compatible with your motherboard.


Which motherboard used with an Energy Saver monitor can be configured to go into standby or sleep mode after a period of inactivity?

A Green motherboard that follows energy saving standards.


What do you need to install chipset drivers?

Youll need to know what chipset you have. This may not be particularly easy to do if your system is not a brand name system. If it is a brand name system, start a question like "What chipset does a (insert brand and model) computer have?" And hopefully we'll be able to answer it. If it isn't a brand name system, this is a stickier situation. The only way to get windows to tell you what chipset you have is to look at what drivers its using. Presumably if your system was using the right drivers you wouldn't be looking to install new ones, so its a bit of a catch-22. There is a program you can run which will tell you. It is called unknown device identifier. With a little know-how and a bit of luck you can use it to figure out what chipset you have. I will link to it below. Once you know what chipset youre looking for, 99% of the job is finished. Just go on Google & search for it.


Is there any Nintendo DS emulator which supports dual slot mode?

no get a life.


What is the communication mode that supports data in both directions at the same time?

full-duplex


What is meant by ATA-33 and ATA-66 with respect to hard disks and which one will be recognized by Intel Mother board SE440BX-2?

ATA-33/66/100/133 are speeds at witch the hard drives pass information to each other and other drives CD/zip/ect. 33 denotes a speed of 33 megabytes per second max transfer rate. 66 Mbps and so on. The motherbroad will see both. but may not be able to transfer data at the speeds rated by the drives http://support.intel.com/support/motherboards/desktop/se440bx2/sb/cs-013633.htm When in doubt ASK INTEL. True they don't support everything indefinetly (sp) but they DO SUPPORT THIS BOARD... Answer = "Hell NO!" Below is an excerpt from the page link offerd here. Will my ATA-66 hard drive work on the Intel SE440BX-2 Motherboard? The IDE controller integrated into the Intel SE440BX-2 Motherboard supports Ultra DMA modes 0,1, and 2. Ultra DMA mode 2, also known as ATA-33 or Ultra DMA 33, is the highest transfer mode supported by the Intel SE440BX-2 Motherboard. The motherboard hardware cannot support the maximum transfer rate of the ATA-66 drives. ATA66 hard drives will only operate up to ATA-33 on the Intel SE440BX-2 Motherboard. Please refer to the Technical Product Specification and the Motherboard Specification Update for more complete details on the various transfer modes. I had to look it up myself as I upgraded this very board with a better chip. Bloody thing will run a 550MHz processor and can't pass ATA33