0
Does 96 Chevy pickup transmission 4l60e match 2000 Chevy 4l60e?
Wiki User
∙ 15y ago
No. They are different, 2000 series are built for a different engine series 5.3L. The electronic controllers are different. Not true. Your not swapping the controllers just the trans. swap the whole thing. tranny is the same from '96 to '05 on the 4l60e since the computer adjusts shifts and ect..
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Does a 1998 Chevy pickup 4l60e transmission match a 1999 Chevy astro van?
Yes it will as long as the 98 trans is not out of a 4x4. SAMETHING
Will a 4L60E from a s10 work in a full sized chevy pickup?
it might as long as the engine the transmission was originally mounted to wasnt a 2.5 ltr or 2.8. the bell houseing want match from these two engines .a 4.3 ltr transmission might match up to a full size chevy truck .especally if you are matching the trans to a 305,350 motors.
What type of transmission does a 2000 gmc jimmy have and what will match up?
4l60e
What type transmission does an 2000 gmc jimmy have and what would other year jimmy or blazer trans. would match up?
The transmission type is 4L60E
Does a 1993 Astro 4l60e match a 2002 Astro 4l60e?
NO, Not even close.
What year 4L60e transmission will fit the 1997 s-10?
gm says 96 and 97 are a match nothing else they told me. hope this helps.
Will a 1994 Nissan pickup 4X4 transmission fit on a 1995 Nissan pickup 4x4?
call auto parts and check part numbers on both years to see if they match.
Is there a difference between the Camaro Z28 transmission and the normal transmission on a Chevy 350?
From 1993 to 2002, the Chevy Camaro offered a 6-speed manual transmission connected to the 350 ci ( 93-97 LT1, 98-02 LS1 ). The Automatic transmission is a 4 speed. Now by normal, I assume you mean the 350 in a 91+ Caprice, 1500 P/U, then yes it is the same 4 speed auto transmission. Depends upon year of the Z28 and the year of the "Normal" 350, but chances are, they'll match up. The lt-1 (93-97) camaros used either a 4l60e auto trans or a 5 or 6 speed manual depending on the year. I 98 when they switched to the ls1 they changed the 4l60e for the application. not sure of manual trans changes though.
Will an 85 Chevy 2.8 motor fit into a 94 Chevy s-10?
The bolt pattern on the back of the 2.8L doesn't match the 4.3L transmission bellhousing.
Does a 1986 camero automatic transmission with a 2.8 ltr v-6 match up with a 2005 Chevy blazer with automatic transmission with a v6?
No, different bolt pattern.
Will a Chevy big block fit on a 700 r 4 transmission?
Sure, it'll fit. But it won't last very long. The 200R4 and 700R4 were engineered for the torque output delivered by a small block engine. Unless you get it built up to match up to a big block - and that customization is NOT going to be cheap - that big block will kill that 700R4 quick. The 700R4 became the 4L60, and, with the addition of electronics, then the 4L60E. You'll notice that, on corresponding years to the 4L60E, anything with a big block, diesel, or even a 3/4 ton and heavier van or pickup with a small block will have the much sturdier 4L80E. If you're swap an OD transmission in place of a direct drive (such as a THM400 or THM450), you're much better off installing something like a Gear Ventures overdrive kit.
Where is the torque converter located on a 96 Chevy blazer?
Inside the transmission. I believe it's bolted to the flywheeel in front of the transmission and connected to the transmmission by it's output shaft which has a cog cut out of iit to match a similar shaft in the transmission.
