You should, you've herd of dust mites and all those microscopic thing in the air. Well there's a lot more under the carpet and in the padding. But it's always your choice.
Usually, unless it is less then a few years old and you are replacing it for color or style reasons. But you will most likely void your warranty on the carpet by not replacing it.
www.empiretoday.com is a trusty carpet replacement online store. They give you an overview of eveything that you would need in order to replace your carpet.
To replace the carpet, you will need to remove the seats, console and any trim that is holding the carpet in place. Once you get everything removed, the carpet should lift out. You can get new carpet from Honda or get aftermarket carpet like this: http://www.stockinteriors.com/items.asp?MakeId=10&ModelId=233&MainCatId=1&Desc=Honda_Civic_Carpet
"You would need many things in order for carpet cleaning. There are a few that you would need for every house. There are vacuums, dusters, carpet shampoo to clean up the residue left behind, and many other things."
You will need to replace this filter every 4 months.
To replace carpet stairs with wood, you will need to remove the carpet, padding, and any existing adhesive. Measure and cut the wood treads and risers to fit the stairs, then secure them in place using adhesive and nails or screws. Finish by sanding and staining the wood for a polished look.
form_title=Install Carpet form_header=7263 Please specify what kind of carpet installation this is.*= () Replace existing carpet () Remodel/Addition () Replace other kind of flooring () New Construction I hope you have purchased the carpet needed for this project.*= () Yes () No In which rooms/areas will the carpet be installed?*= [] Bedroom(s) [] Entry or hallway [] Dining room [] Family or living room [] Kitchen [] Basement Is this need emergency in nature?*= () No () Yes
Every year x
to replace the brake lights you must remove the carpet from the inside of the trunk near the area of the light. behind the carpet you notice 3 plastic screws which you have to remove. once removed you will be able to slide the whole brake/tail light section out. find the bulb you need to replace. screw section back to the body. put the carpet back the best you can. then your good to go.
To replace carpet on stairs with wood, you will need to remove the existing carpet, padding, and tack strips. Measure and cut the wood treads and risers to fit the stairs. Install the wood treads and risers using construction adhesive and nails or screws. Finish by sanding, staining, and sealing the wood for a polished look.
Then you need a filter, just replace it every 50,000 miles.
What are some carpet cleaning tools one would need to do a small home? I don't need to clean on a regular basis, just maybe once every few months.