0
The basic difference is between JFET and enhanced MOSFET,although the construction of JFET and depletion MOSFET is different but their most of the characteridtics are same,i.e shockly equation can be applied on both of them,but in JFET we cant give to gate voltage, the +ve value,because it does not works, but in depletion we can give,but some limited +ve value. Now enhanced MOSFET is different,shockly equation cant be applied.The transfer characteristics are purely in +ve Vg region. i.e for E-MOSFET Vg should be > 0,for its proper function.
Wiki User
∙ 14y ago
Wiki User
∙ 15y agoFETs (field effect transistors) have a high impedance insulated gate, and are primarily voltage-controlled. Junction FETs and metal-oxide-semiconductor FETs are two good examples. BJTs (bipolar junction transistors) equivalent terminal, the base, is relatively low-impedance, and so BJTs are primarily current-controlled. The gate insulator is very thin, and subject to breakdown due to static discharge. This is why many IC's are static sensitive. Since the base of a BJT is not insulated, it does not suffer from this particular failure mode.
Wiki User
∙ 14y agode mosfet can be operated in both modes ie depletion(-ve suppy) as well as enhancement mode(+ve supply) in case of n-channel mosfet. but e mosfet only operated in enhancement mode ie positive supply at gate(in case of n channel). Also,e mosfet is normally in off state always bt it is not with de mosfet.
Wiki User
∙ 11y agoAn EMOSFET is normally non-conducting but conducts when the channel is enhanced by applying a voltage to the gate and pulling carriers into the channel.
a DEPLETION TYPE mosfet normally conducts but becomes more n more non-conducting as the carriers are depleted or pulled out of the channel by applying a voltage. the polarity of the vtg here depends upon whether the MOSFET is n channel or p channel. :)
Wiki User
∙ 12y agoThe jfet has a base current while the mosfet has no gate current and is operated by an electric field.
Wiki User
∙ 10y agowhat is differnce between
Wiki User
∙ 10y agotae
Add your answer:
Earn +20 pts
Explain the relationship between voltage current and resistance?
The ratio of voltage to current is called resistance. In hydraulic terms, you can equate voltage to the difference in pressure between two points, current with the resulting flow of fluid between those points , and resistance as the opposition to that flow.
What is the difference between Mnemonics and hexadecimal representation?
Mnemonics is a method of remembering things by associascation. Hexadecimal is a number system. 0-9 are as usual and then a(10) b(11) c(12) d(13) e(14) f(15)
What is the difference between E and nu in engineering geology?
E is generally taken to be the elastic constant known as Young's modulus which describes the relationship between axial stress and axial strain where Hooke's law still applies (i.e. linear elasticity). Nu is Poisson's ratio which is the relationship between axial strain and radial or transverse strain. For more information, please see the related link.
What are the difference between elactric field and electric displacement field?
The electric displacement field is a vector field, shown as D in equations and is equivalent to flux density. The electric field is shown as E in physics equations.
How much electrical energy is required to move 4.00 mC of charge through a potential difference of 36.0 V?
0.144 JOULES. One can calculate this from the formula E=Vq in which E is energy, V is potential difference & q is charge.
The main factor which differentiate a de mosfet from an e only mosfet is the absence of?
conductiong channels
Difference between de-mosfets e-mosfets and jfets?
The basic theory of operation is the same, but the device structure is different. With both a MOSFET and a JFET, a conductive channel is established between two terminals (the drain and the source). The structure of the gate terminal makes the difference between the two. In a MOSFET, the metal gate is separated from the channel by an insulator (the O in MOSFET means Oxide, the insulator). In a JFET the gate is a doped region essentially within the conductive channel.
Main factor which differ De mosfet from an e only mosfet?
An e only(enhancement) ÊMOSFET is off at zero gate-source voltage. Meanwhile, a de (depletion enhancement)ÊMOSFET is on at zero gate-source voltage.
Diffrance between De and E motors?
DE is dohc E is sohc
Difference between Mercedes e class elegance and classic?
What is the difference between Mercedes Benz E class 'Elegance'and classic
What is the difference between E-7018 and E-7018-1 welding electrodes?
what is the difference between 7018 and 7018-1
What is the difference between grills grilles?
One has an E!!!
What is the difference between ATX and EATX?
2
How e mosfet works?
A MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) works by controlling the flow of electricity between the source and drain terminals using an electric field applied to the gate terminal. When a voltage is applied to the gate terminal, it creates an electric field that either allows or blocks the flow of current between the source and drain terminals, acting as a switch or amplifier in electronic circuits.
The difference between a trend analysis and a comparative analysis?
Difference between e-resuming system of bdjobs and phrotom alo.com
How does e mail differ from the bulletin board?
difference between electronic mail and bulletin board
What are the differences betweeen e-mosfet and d-mosfet?
An e-mosfet is and "enhancement" mosfet. A d-mosfet is a "depletion" mosfet. These essentially show what mode the mosfet operates in when a voltage is applied to the gate. . An enhancement mode mosfet is normally non-conducting but conducts when the channel is enhanced by applying a voltage to the gate and pulling carriers into the channel. A depletion mode mosfet normally conducts but becomes more and more non-conducting as carriers are depleted or pulled out of the channel by applying a voltage. The polarity of the voltage depends on whether it is an N channel or P channel. P channel uses positively doped silicon while N channel uses negatively doped silicon. N channel fets are used wherever possible because N material conducts better than P material. There are basically two types of fet, the jfet and the mosfet. The jfet uses a single junction to control the channel hence draws some current. Bipolar transistors use two junctions. In the mosfet (Metal Oxide Semiconducting Field Effect Transistor) there is no such junction hence draw so little current for control purposes it can be regarded as zero. The gate is isolated from the channel by a very thin layer of metal oxide (usually chromium dioxide). An enhacement mode mosfet can be turned on by applying a voltage then removing the wire to the gate. The channel will then remain conducting for some time.
