Capacitor values in certain applications can be very forgiving and in others quite critical. In power filtering for example you might be able to get away with the higher value. As long as the larger capacitor has the same or higher voltage rating you can give it a shot provided you understand that by doing so either it won't work or make harm your device.
Capacitor is a noun, as in a person, place or thing. It is an electrical device. Ex: The capacitor failed and has to be replaced.
Use of rvt in capacitor bank
The products that uses the capacitor are filters and oscillators.
in a ceiling fan the capacitor is used to give the starting torque to motor for run. because we need a rotating type of magnetic field to the motor to run. once the motor run it become running even we disconnect the capacitor. by using the capacitor we produce the electrica difference(phase angle) between the two current taking by capacitor and the motor winding.
we use oil capacitor in horizontal way,This is correct or not?
A capacitor is a storage device like a battery it will however discharge at a rate of 63% for one RC time constant .so it is there to provide more initial force.
That would probably be OK, it might take a little longer to start.
Sure if it fits and meets other specs like operating temperature.
There are many different 'run' capacitors on motors. It depends on the motor make and use. You need to consult your manual or local electric motor shop.See related links below for good information on how capacitors effect motor starting.
No
Capacitor is a noun, as in a person, place or thing. It is an electrical device. Ex: The capacitor failed and has to be replaced.
I am going to assume that the capacitor in question has one uf or mfd rating and the one you want to use has two such as: 30+7.5uf if so then yet as long as you hook to the terminals that supply the same uf as the oem capacitor. The terminal marked HERM will be the terminal that has the highest of the two uf ratings. hope this helps!!
Start capacitors and run capacitors are two different types of capacitors. They alter the current to create a rotating magnetic field. They have two or three terminals to which the wires are attached.
An AC capacitor is composed of two DC capacitors with the foil ends (-) connected together and the center ends (+) connected to the outside. There are variations to the connections. Each capacitor has to have the voltage rating required by the application -- and there are two capacitors in series in an AC capacitor. A 230V AC capacitor, depending on manufacturing design standard, may not be suitable for starting a 230V air conditioner.
Use of rvt in capacitor bank
In general, no. You need to use the correct capacitor as designed for the circuit.
The shape of a capacitor has no meaning to the circuit. What matters is the capacitance, the voltage rating, and the current rating. 35uf is not the same as 45uf.