The furnace can be but it is not a good idea. Safety code requires a disconnect switch outside the area where the furnace is situated. This switch is used for an emergency shut down in case something electrically goes wrong with the furnace. In modern homes these furnaces are wired to a dedicated 120 volt circuit from the distribution panel. From the panel, the circuit is routed to the safety switch. From the safety switch, the circuit then continues to the furnace load.
No. To prevent this sort of thing from happening, the 277 volt device and receptacle is physically larger that a 240 volt receptacle and will not fit in a regular receptacle junction box. For a 277 volt system the proper size junction boxes have to be purchased.
Yes, the rating on the receptacle is the maximum amount of voltage that is legally allowed to be applied to the device.
No. First off, the plug will be different. And even if you replace the plug, it won't work right on the wrong voltage
Yes, a 110 volt device can be plugged into a 125 volt receptacle. The voltage rating on the receptacle is only there as the highest voltage supply that the manufacturer recommends their equipment be connected to.
Yes. If the plug (cap) end of the 250 volt lamp is compatible to the receptacle the lamp would work. The light output of the lamp would not be very bright. Because the working voltage is halved so would the light output.
To start I would check the connections on the receptacle. Next change the receptacle. It sounds to me there is a corrosion problem here...pkazsr
You tell yourself the 125 volt receptacle is a 120 volt receptacle. They're the same thing.
No. To prevent this sort of thing from happening, the 277 volt device and receptacle is physically larger that a 240 volt receptacle and will not fit in a regular receptacle junction box. For a 277 volt system the proper size junction boxes have to be purchased.
The pin configuration of the 240 volt receptacle is different from a 120 volt pin configuration. This is a safety factor to prevent the wrong voltage being applied to the wrong devices.
The pin configuration of the 240 volt receptacle is different from a 120 volt pin configuration. This is a safety factor to prevent the wrong voltage being applied to the wrong devices.
Yes, the rating on the receptacle is the maximum amount of voltage that is legally allowed to be applied to the device.
You will only get a secondary voltage of half of what it is supposed to be. This is a hypothetical question because a 120 volt plug (cap) will not fit into a 240 volt receptacle. The pin configurations will not align up.
No. A household receptacle is 120V. It will not work.
No. First off, the plug will be different. And even if you replace the plug, it won't work right on the wrong voltage
Not directly. Maybe with a proper adapter. Even if the TV plug fits into the receptacle (it shouldn't), the TV would not work and could possibly overheat or cause a fire, or be damaged internally.
Yes, a 110 volt device can be plugged into a 125 volt receptacle. The voltage rating on the receptacle is only there as the highest voltage supply that the manufacturer recommends their equipment be connected to.
Yes. If the plug (cap) end of the 250 volt lamp is compatible to the receptacle the lamp would work. The light output of the lamp would not be very bright. Because the working voltage is halved so would the light output.