answersLogoWhite

0


Best Answer

A computer can process data, pictures, sound and graphics. They can solve highly complicated problems quickly and accurately.

Input Unit:

Computers need to receive data and instruction in order to solve any problem. Therefore we need to input the data and instructions into the computers. The input unit consists of one or more input devices. Keyboard is the one of the most commonly used input device. Other commonly used input devices are the mouse, floppy disk drive, magnetic tape, etc. All the input devices perform the following functions.

  • Accept the data and instructions from the outside world.
  • Convert it to a form that the computer can understand.
  • Supply the converted data to the computer system for further processing.

Storage Unit:

The storage unit of the computer holds data and instructions that are entered through the input unit, before they are processed. It preserves the intermediate and final results before these are sent to the output devices. It also saves the data for the later use. The various storage devices of a computer system are divided into two categories.

1. Primary Storage: Stores and provides very fast. This memory is generally used to hold the program being currently executed in the computer, the data being received from the input unit, the intermediate and final results of the program. The primary memory is temporary in nature. The data is lost, when the computer is switched off. In order to store the data permanently, the data has to be transferred to the secondary memory.

The cost of the primary storage is more compared to the secondary storage. Therefore most computers have limited primary storage capacity.

2. Secondary Storage: Secondary storage is used like an archive. It stores several programs, documents, data bases etc. The programs that you run on the computer are first transferred to the primary memory before it is actually run. Whenever the results are saved, again they get stored in the secondary memory. The secondary memory is slower and cheaper than the primary memory. Some of the commonly used secondary memory devices are Hard disk, CD, etc.,

Memory Size:

All digital computers use the binary system, i.e. 0's and 1's. Each character or a number is represented by an 8 bit code.

The set of 8 bits is called a byte.

A character occupies 1 byte space.

A numeric occupies 2 byte space.

Byte is the space occupied in the memory.

The size of the primary storage is specified in KB (Kilobytes) or MB (Megabyte). One KB is equal to 1024 bytes and one MB is equal to 1000KB. The size of the primary storage in a typical PC usually starts at 16MB. PCs having 32 MB, 48MB, 128 MB, 256MB memory are quite common.

Output Unit:

The output unit of a computer provides the information and results of a computation to outside world. Printers, Visual Display Unit (VDU) are the commonly used output devices. Other commonly used output devices are floppy disk drive, hard disk drive, and magnetic tape drive.

Arithmetic Logical Unit:

All calculations are performed in the Arithmetic Logic Unit (ALU) of the computer. It also does comparison and takes decision. The ALU can perform basic operations such as addition, subtraction, multiplication, division, etc and does logic operations viz, >, <, =, 'etc. Whenever calculations are required, the control unit transfers the data from storage unit to ALU once the computations are done, the results are transferred to the storage unit by the control unit and then it is send to the output unit for displaying results.

Control Unit:

It controls all other units in the computer. The control unit instructs the input unit, where to store the data after receiving it from the user. It controls the flow of data and instructions from the storage unit to ALU. It also controls the flow of results from the ALU to the storage unit. The control unit is generally referred as the central nervous system of the computer that control and synchronizes its working.

Central Processing Unit:

The control unit and ALU of the computer are together known as the Central Processing Unit (CPU). The CPU is like brain performs the following functions:

• It performs all calculations.

• It takes all decisions.

• It controls all units of the computer.

A PC may have CPU-IC such as Intel 8088, 80286, 80386, 80486, Celeron, Pentium, Pentium Pro, Pentium II, Pentium III, Pentium IV, Dual Core, and AMD etc.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

it is a combination of embedded softwere and computer hardwhere

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

gonkar me se nikal le

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

yes

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Block Diagram of Microprocessor based system?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

Can you get the circuit diagram of Fingerprint based access control system?

Yes. You can get the circuit diagram of Fingerprint based access control system.


How to control speed of dc motor using microprocessor 8085?

Here the DC motor is controlled by the microprocessor (8085). The kit used was dynalog 8085 kit. The DC motor is very difficult to control unlike the stepper motor, which can be controlled by giving the appropriate CONTROL WORD. By knowing the DC motor theory we know the different methods used to control the motor, the most primitive and the once upon a time the most popularly method was WARDLEONARD motor speed control, but this had many disadvantage, so the world of Electronics brought in the thyristor control, which were very flexible and can be employed to use AC instead of DC cause they had a inbuilt convertor. The thyristor-based system is good but when used with Microprocessor based speed controller they are really good. We have shown the block diagram, circuit diagram used by us to control a small tape recorder sized motor


Advantages of microprocessor based system?

There are many different advantages of a microprocessor based system. Some of these include that it only uses 3 components so it is simple to use and install and it will increase your memory.


How does a microprocessor know whether the next byte is an instruction or data?

A microprocessor know whether the next byte is an instruction or data because the microprocessor knows for what it is looking. The bus, on the other hand, for an 8085 based system, knows an opcode from data by looking at S0 and S1 when IO/M- is low. If both are high, it is an opcode, otherwise it is data.


Application of microprocessor based system instrumentation test equipment system?

i. For measurements, display and control of current, voltage, temperature, pressure, etc. ii. For traffic control and industrial tool control. iii. For speed control of machines.

Related questions

Microprocessor-based computer system?

comuter which uses microprocessors for control task that is the microprocessor based computer system........


What are advantages of downloading the main program into a microprocessor based system.Are there any disadvantages?

The advantages of downloading the main program into a microprocessor based system can be it can cause the system to run efficiently and the main program will be able to be easily accessed through the microprocessor system. Disadvantages can be due to errors they can happen due to system failure.


Can you get the circuit diagram of Fingerprint based access control system?

Yes. You can get the circuit diagram of Fingerprint based access control system.


What type of microprocessor is used in server based system?

which type of microprocessors are used in servers


Difference between microprocessor based system and microcontroller based system?

A Microprocessor based system depends on the external peripherals such as RAM, ROM, Hard-disk and other devices, and work with any available operating system's, which the user can alter.A Micro-controller based system have all the peripherals built on a single silicon chip and programed for hardware specific implementation's, which the user cannot alter.ABHI


How to control speed of dc motor using microprocessor 8085?

Here the DC motor is controlled by the microprocessor (8085). The kit used was dynalog 8085 kit. The DC motor is very difficult to control unlike the stepper motor, which can be controlled by giving the appropriate CONTROL WORD. By knowing the DC motor theory we know the different methods used to control the motor, the most primitive and the once upon a time the most popularly method was WARDLEONARD motor speed control, but this had many disadvantage, so the world of Electronics brought in the thyristor control, which were very flexible and can be employed to use AC instead of DC cause they had a inbuilt convertor. The thyristor-based system is good but when used with Microprocessor based speed controller they are really good. We have shown the block diagram, circuit diagram used by us to control a small tape recorder sized motor


Why microcomputer system based on 8 bit microprocessor have 64K memory?

Even though the 8085 is an 8 bit microprocessor, it can address 64K memory, because it has a 16 bit address bus.


Why microprocessor based interrupt are termed as flexible systems?

Ans. In circuit emulator is an aid which allows a microprocessor based system to be' directly attached to an MDS system for testing. The program runs at true system speed. Facilities like single step program execution, breakpoints, real time trace facility etc. available with MDS can be utilised. By this approach, it provides substantial savings in time compared with attempts to debug each microprocessor individually.


What has the author Peng Seng Lau written?

Peng Seng Lau has written: 'Microprocessor-based floppy disc storage system'


Applications of Microprocessors in Telecommunications and power system?

: hi.. : i have a little idea about this question.. : because of low power consumption and accurate measurements we can use static relays based on microprocessor in power system networks. also filtering of noise is possible with static relays(based on microprocessor). : also for continious monitoring and security we can use these microprocessors.


Advantages of microprocessor based system?

There are many different advantages of a microprocessor based system. Some of these include that it only uses 3 components so it is simple to use and install and it will increase your memory.


What has the author P Spencer written?

P. Spencer has written: 'Microprocessor based position control system' 'Politics of belief in nineteenth-century France'