I = E/R
Yes. Pressure being voltage. Voltage divided by resistance equals current.
half of the current flowing thru resistor 1.... V=IR.
Current flowing through a device depends on resistance offered by that device.
Current stops flowing.
V = I * R. 1.5 = 8*IThe current flow is 3/16 Amps.
Resistance
..using the formula Voltage(V)=Current(I) * Resistance(R) .. we can get the result ...current will be 5 Ampere
V=IR V=Voltage I=Current R=Resistance I=V/R 5 Amps.
A compass needle test will determine whether a current is flowing in the wire.IF the current is flowing the compass needle will deflect from alignment with the wire.
as the given cells have the same current flowing in through them (current flowing through the cells connected in series is equal to the current flowing when connected in parallel ) equate the formula's of cells connected in series and cells connected in parallel.thus by equating we get the value of the internal resistor as 2 ohms.
A direct current is obtained from a connection to a battery.
Yes. Pressure being voltage. Voltage divided by resistance equals current.
Flowing electricity is called electric current.
half of the current flowing thru resistor 1.... V=IR.
The flowing of electricity (amperage) is governed by the internal resistance of the connected device.
If the resistors are connected in series, the total resistance will be the sum of the resistances of each resistor, and the current flow will be the same thru all of them. if the resistors are connected in parallel, then the current thru each resistor would depend on the resistance of that resistor, the total resistance would be the inverse of the sum of the inverses of the resistance of each resistor. Total current would depend on the voltage and the total resistance
It depends on1 the resistance of wire.2the voltage between the ends of the wire.3the flowing current time.