I can't do all the math for that but if it helps that's a 1,077.3 watt heat discharge.
The formula you are looking for is R = E/I. Resistance = Volts/Amps.
Resistance = 120/15 = 8 ohms
I have no idea
The formula you are looking for is W = I x E.
The voltage of a battery goes as the current times the resistance (V=IR). Because the voltage is being held constant, the resistor that draws the most current will have the lower resistance.
4 resistors were connected in parallel it yields 5A of current from 220V supply.
11.5 x 240 = 2760W motor.
1.7amp
The formula is Resistance= Voltage/ Amps(current) In your example: R=50/2.5, so the answer is 20 ohms.
I have no idea
Yes. It draws less current.
The formula you are looking for is W = I x E.
240 ohms
Wire is sized by the amount of amperage the device to be connected draws. Without this data the question can not be answered.
The voltage of a battery goes as the current times the resistance (V=IR). Because the voltage is being held constant, the resistor that draws the most current will have the lower resistance.
Given R=? I=12 ampere V=120 Volts equation I=V divided R Solution; R=12 ampere 120 Volts answer (10)
because at start the motor draws larger quantity of current and this may affected the rotor windings in order to limit current always resistance is connected.
4 resistors were connected in parallel it yields 5A of current from 220V supply.
11.5 x 240 = 2760W motor.