I'm not sure if I understand your question but if you are asking if the wire number is the maximum amperage (current) it can hold the answer is NO. For example #8 copper wire will allow much more current (before melting) then #12 copper wire. Generally the higher the wire number the less amps it can hold.
According to the NEC (table 310. 16) it is 18 amps.
16 awg can be used for the toaster
Most lighting circuits are 15 amps and require 14 AWG wire. 16 AWG wire has a smaller cross section than 14 AWG and cannot be used in the 15 amp circuit. I had an answer here and deleted it when I found it to be at least partially incorrect. What I found is this: Sec 240.5(B)(2) allows 16 AWG fixture wire to be run up to 100 feet in length when attached to a 20 amp circuit. I thought it was 18 inches. Fixture wires are defined in Table 402.3.
A #12 wire is rated at 20 amps, continuous loading at 80% = 16 amps. # 10 wire is rated at 30 amps, continuous loading at 80% = 24 amps.
U can get 16 SWG
Its 16 AWG
Sorry, there is no such wire size as "30 gauge" in the AWG (American Wire Gauge) system. For the ampacity rating of all standard conductor sizes, go to Table 310-16 of the National Electric Code. If you mean what wire size will carry 30 amps then a #10 copper wire insulation rating of 90 degree C is rated at 30 amps.
Isn't it 35, according to the NEC 310.15(B)(16) Table.
AWG Wire Ampacity Gage (Amperes) 16 10 A 14 15 A 12 20 A 10 30 A 8 45 A 6 65 A 4 85 A 2 115 A 1 130 A 0 150 A So if anything its probably 12-14 gauge wire Yw
AWG 16
A #16 AWG will work.
16 awg can be used for the toaster
Most lighting circuits are 15 amps and require 14 AWG wire. 16 AWG wire has a smaller cross section than 14 AWG and cannot be used in the 15 amp circuit. I had an answer here and deleted it when I found it to be at least partially incorrect. What I found is this: Sec 240.5(B)(2) allows 16 AWG fixture wire to be run up to 100 feet in length when attached to a 20 amp circuit. I thought it was 18 inches. Fixture wires are defined in Table 402.3.
For wire gauge, 1.25 mm diameter wire is closest to 16 gauge (AWG). See related link.
Awg 16-2 how about 12/2?
A #12 wire is rated at 20 amps, continuous loading at 80% = 16 amps. # 10 wire is rated at 30 amps, continuous loading at 80% = 24 amps.
U can get 16 SWG
I think you mean 16 AWG THWN. It's coating for PVC piping.