answersLogoWhite

0

Infiniti Q45

Manufactured in Japan from 1990 to 2006, Infiniti Q45 is a four-door rear-wheel drive powered by a V8 engine. Originally intended for upper-middle class families, it was sold to Nissan because of its unimpressive sales performance.

500 Questions

How do you change a starter on a 1999 Infiniti Q45?

User Avatar

Asked by Wiki User

When replacing the starter on your Infiniti i35, it is best to seek the advice of a certified auto mechanic. If you aren't experienced in auto repairs you may do more damage by working on it yourself.

What does it mean when a yellow light comes on above an icon that says check in the middle of it above the oil light?

User Avatar

Asked by Wiki User

to check the engine...go have the codes read by a mechanic, he will tell you what it means in better detail

Your 1994 Q45 runs well but periodically stalls and difficult to restart Help?

User Avatar

Asked by KenP

hey there you might want to try your air intake fuse........not sure but i had my explorer sound like it was chugging and stalling and that is what it was.

On a 1996 infinity q45 what is wrong if your passenger side door lock and power window are not working but all the fuses are fine?

User Avatar

Asked by Wiki User

Power window module (amplifier) is not working. It is located inside the door panel.

Why does your 1993 infinti q45 stall then cut itself completely off once you stop?

User Avatar

Asked by Wiki User

From my experience, it could be your MAF (Mass Air Flow) sensor. Signs and symptoms of a bad MAF are stumbling, rough idle, occasional stalling , etc. It could be that your connector is corroded, the pins have come uncrimped, or the unit itself needs to be cleaned or replaced. Another culprit of stalling in early Q45's could be low ATF.

Why does the slip light come on in a 1994 Infiniti Q45?

User Avatar

Asked by Wiki User

Well, I am not a mechanic but I own a 96 Q45 and experienced a similar problem. The warning light has to do with the traction control system. Your problem could be a number of things since the Q45 has so many sensors and relays etc. When I went to my dealership with my problem, the service advisor pointed out a black plastic box under the hood on the passenger's side close to the firewall. The black plastic box is attached to a silver aluminum box with a number of hydraulic lines attached to it. Remove the cover from the plastic box and you will see two relays inside. On the advice of the service advisor as a first step to solve the problem I replaced the two relays. That did solve my problem and that was almost 4 yrs ago now. The relays pull right out of their sockets and you just plop the new ones in. I live in Fl. but ordered my new relays from Infiniti of Scottsdale Az. because I could get them much cheaper there. They are called "Relay Assy-valve" Part# 47605-17V03 ($20.27) and "Relay Assy-Actuator" Part# 47605-17V10 ($19.28).

Hope this helps

Where is obd1 97 q45?

User Avatar

Asked by Wiki User

What is the shop labor hours to replace a knock sensor on a infiniti q45 1997?

User Avatar

Asked by Wiki User

"http://wiki.answers.com/Q/What_is_the_shop_labor_hours_to_replace_a_knock_sensor_on_a_infiniti_q45_1997"

I have bad vibration in rear from 30 mph and up in a 92 infiniti Q45 any ideas?

User Avatar

Asked by Wiki User

The driveshaft on the 90-93 Q45 had a thinner rubber bearing than the ones found on the later model years. According to my Q45 specialist, it was a common issue and was usually replaced under warranty. If your Q45 has 100k+ miles on it, I would suspect the driveshaft bearing. Purchasing a factory driveshaft now would most likely get you the later model shaft with the thicker bearing. Another issue could be your transmission mounts and exhaust hangers. The rubber may have deteriorated and severly hampered it's ability to dampen the vibrations.

How do you install fog lights in the factory fog light holes of a front bumper on 2005 Honda Element?

User Avatar

Asked by Wiki User

fog light holeyou have to take off bumber and cut holes with dremal tool using a drywall hole cutting bit.

Full instructions are at http://www.handa-accessories.com/element/05fogs.pdf includes wiring info. Helpful even if you are not installing their kit.

What cars fit 5x120mm bolt pattern?

User Avatar

Asked by Wiki User

Every BMW of all years with 5 bolts.

How do you fix code 1320 on a 1997 infinite Q 45?

User Avatar

Asked by Wiki User

on my 1997 infinite Q45 i have the code 1320 how do i fix it?

What are quantitative techniques?

User Avatar

Asked by Wiki User

Many of the quantitative techniques fall into two broad categories: # Interval estimation # Hypothesis tests Interval Estimates It is common in statistics to estimate a parameter from a sample of data. The value of the parameter using all of the possible data, not just the sample data, is called the population parameter or true value of the parameter. An estimate of the true parameter value is made using the sample data. This is called a point estimate or a sample estimate. For example, the most commonly used measure of location is the mean. The population, or true, mean is the sum of all the members of the given population divided by the number of members in the population. As it is typically impractical to measure every member of the population, a random sample is drawn from the population. The sample mean is calculated by summing the values in the sample and dividing by the number of values in the sample. This sample mean is then used as the point estimate of the population mean. Interval estimates expand on point estimates by incorporating the uncertainty of the point estimate. In the example for the mean above, different samples from the same population will generate different values for the sample mean. An interval estimate quantifies this uncertainty in the sample estimate by computing lower and upper values of an interval which will, with a given level of confidence (i.e., probability), contain the population parameter. Hypothesis Tests Hypothesis tests also address the uncertainty of the sample estimate. However, instead of providing an interval, a hypothesis test attempts to refute a specific claim about a population parameter based on the sample data. For example, the hypothesis might be one of the following: * the population mean is equal to 10 * the population standard deviation is equal to 5 * the means from two populations are equal * the standard deviations from 5 populations are equal To reject a hypothesis is to conclude that it is false. However, to accept a hypothesis does not mean that it is true, only that we do not have evidence to believe otherwise. Thus hypothesis tests are usually stated in terms of both a condition that is doubted (null hypothesis) and a condition that is believed (alternative hypothesis). Website--http://www.itl.nist.gov/div898/handbook/eda/section3/eda35.htm

P.s "Just giving info on what you don't know" - ;) Sillypinkjade

----

How to replace fuel injector for 1992 infiniti q45?

User Avatar

Asked by Wiki User

Injectors 1, 2, 4, & 8 (the four corners) are able to be removed without taking off the plenum. Detailed instructions with pictures can be found @ Q45.org.

How many quarts of oil does a 1999 Q45 infiniti use?

User Avatar

Asked by Wiki User

A 1999 Q45 takes 6 quarts of oil (with a new filter).

What does the p1320 code on a q45 mean?

User Avatar

Asked by Crmeans

Trouble code P1320 means: Ignition Signal - Primary