answersLogoWhite

0

📱

Dish Network

Dish Network is the largest satellite provider in the United States. Dish has over 14.337 million customers and approximately 24,500 employees.

500 Questions

What channel is ovation on for dish network?

User Avatar

Asked by Wiki User

You will be able to find Ovation on channel 157 with DISH Network, this channel will be found in our America's Top 200 package as well as our America's Top 250 package and America's Everything Pack.

What channel is Twilight saga on with dish?

User Avatar

Asked by Wiki User

The Twilight saga movies may be available for on-demand viewing on Dish's video on demand service, depending on their current catalog. You can also check if they are playing on any movie channels included in your Dish subscription. Alternatively, you can rent or purchase the movies through Dish's pay-per-view service.

What channels are the music channels on dish?

User Avatar

Asked by Wiki User

It all depends upon what DISH package you have. There are alot of music channels available on dish: channels 923 - 981 , channels 6001 - 6084.

What channel is nbcsn on dish network?

User Avatar

Asked by Wiki User

DISH is a leading satellite TV & internet provider offering the best programming and technology at an unbeatable value. Dish delivers the best video anywere at anutime utlizing state-of-the-art equipment & technology & award-winning HD & DVR Technology!

cutt.ly/Mh2kgvK

What channel is GSN on Dish Network?

User Avatar

Asked by Wiki User

DISH is a leading satellite TV & internet provider offering the best programming and technology at an unbeatable value. Dish delivers the best video anywere at anutime utlizing state-of-the-art equipment & technology & award-winning HD & DVR Technology! cutt.ly/oh42ktR

How do you remove a satellite dish?

User Avatar

Asked by Wiki User

Depends on where/how it is installed. If it is a wood, or metal pole, you should either dig up the pole (hard), or dig down around a couple inches and cut it off below grade. If it is a metal pole, use a sledgehammer to smash down the pipe so if the dirt wahes away no one will step on it. For a roof mount, 1st remove the dish, support arm from the foot plate. You will need 2 7/16" wrenches, or a wrench and soket/ratchet. Where the mount "arm" meets the foot plate there are 2 slider carriage bolts with 7/16" nuts used for leveling. Reome nuts and bolts. In the center of the arm is a bolt that runs through the sides of the footplate and the arm. Remove this as well. LEAVE THE FOOTPLATE INTACT. You don't want to break the seal with the roof. Remove the footplate when you have replacement shingles.

How do you automatically compare two satellite dish signals to use strongest signal on a single receiver?

User Avatar

Asked by Wiki User

It can be done, but why? In fact, it's possible to connect several dishes together, but you need support electronics and signal phasing systems. How 'bout this instead? Use a larger dish, or a dish enlargement extension kit? Trust me, it'll be a LOT cheaper and less troublesome if you do. The more signal you can capture (by the size of the dish) and focus into the LNB, the better the signal. In reality, the real size of a Ku band dish is 5 meters, and you'e most likely got an 18" dish. In this case, bigger is better.

How do you reglaze dishes?

User Avatar

Asked by Wiki User

I have beautiful old white stoneware that the finish has worn off of. Now they show gray marks from eating utensils every time I use them. I have cleaned them all up from the marks and am wondering if it is possible to re-glaze them so that they would be protected from re-marking. I am not interested in changing them, just replacing the protective clear glaze.

What channel is Dish Network CBS?

User Avatar

Asked by Wiki User

The local channels vary by where you live, but are usually located in the lower number channels (2-30).

Will a 3 LNB Direct TV dish work with a Dish Network receiver?

User Avatar

Asked by Wiki User

No, there is a receiver in between.

An LNB is a 'Low Noise Block'. The 'block' refers to a block of frequencies (not a magic box).

It is a low noise amplifier and converter. It changes the microwaves from the satellite signal, to a different, lower frequency that the satellite receiver can handle.

A voltage is usually put on the coax from the satellite box. This selects whether the polarized signal received by the LNB, is horizontal or vertical.

What channel is nickelodeon on dish network?

User Avatar

Asked by Wiki User

If you have DISH Network you will be able to find Teen Nick on channel 181.

How much does it cost for an extra receiver for dish network?

User Avatar

Asked by Wiki User

If you are referring to the monthly cost it would be dependent upon what type of receiver for example; high definition or standard definition, DVR capability or no DVR, single receiver or duo receiver. Currently, the charge for a additional receiver based upon capability, can cost any where from $7/mnth up to $17/mnth.

How do you switch from dual mode to one tv?

User Avatar

Asked by Wiki User

To change the mode on your receiver, on the front panel of the receiver is a 'Mode' button. Press that to change the receiver between Single and Dual mode.

What is the dish network code for a Toshiba remote?

User Avatar

Asked by Wiki User

I have provided instructions on how to program your DISH remote to your Toshiba TV. Here is a list of more codes that should work with your TV: 631, 617, 635, 615, 667, 590, 771, 744, 680, 683, 688. As you go down the list, the success rate decreases substantially.

  • Remotes: Basic (Television Only)
    1. Turn the Television On.
    2. Press and hold the TV Power button for three seconds until the LED flashes.
    3. Enter the three-digit code using the buttons on the number pad.
    4. Press OK. Note: The LED will flash three times.
    5. Test functionality with the TV.
    6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Ray Calo

DISH Network

A few different DISH Network remote codes for your Toshiba TV that you can try & one should successfully program your remote are, 744, 617, 619, or 595.

Dish network remote code honeywell tv?

User Avatar

Asked by Wiki User

I have provided instructions on how to program your DISH remote to your TV. Since we don't have codes for Honeywell TVs, the instructions are for a power scan.

Remote: Basic Remote (Television Only) Power Scan:

  1. Turn the Television On.
  2. Press and hold the clear TV button for three seconds until the LED flashes.
  3. Press and release the red TV Power button.
  4. Press and release the Up or Down Arrow on the remote until the television turns off.
  5. After the television turns off, press and release the OK button.
  6. Test functionality with the TV.
  7. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Try an Avex R6 Universal remote control. I bought mine for $20 at Walmart. You can use your Dish network remote to program the universal. The TV was picked up with the "Quick Set-up Method" or you can use your TV remote to program buttons also.

What is phone number for dish network in littleton co?

User Avatar

Asked by Wiki User

DISH is a leading satellite TV & internet provider offering the best programming and technology at an unbeatable value. Dish delivers the best video anywere at anutime utlizing state-of-the-art equipment & technology & award-winning HD & DVR Technology!

cutt.ly/VhCxXPp

What are the DISH Network Pre Employment Test answers?

User Avatar

Asked by Wiki User

DISH is a leading satellite TV & internet provider offering the best programming

cutt.ly/HjupSID

Dish delivers the best video anywere at anutime utlizing state-of-the-art equipment & technology & award-winning HD & DVR Technology!

What is the dish network remote code for Samsung?

User Avatar

Asked by Wiki User

Here are the codes for your Daewood TV: 531, 719, 727, 524, 663, or 665. I have also provided the instructions on how to program your Dish remote to your TV.

Address Remote to TV/Other Devices

  1. While at the device location (TV, etc), point the remote at the device. Press and hold the device button on the remote (TV, Aux, etc). - All four mode buttons should light up
  2. Enter the three-digit remote control code - The mode button (TV, Aux, etc.)you selected should light up
  1. Press the Pound (#) button - The mode button you are programming should flash three times
  2. Press the large, red POWER button - The device should turn off

What channel is NBC on dish in the state of Florida?

User Avatar

Asked by Wiki User

It depends on which part of North Carolina you are in. There are 3 major local markets in NC.

You can go to our website dishnetwork.com and click on a link, Check TV Schedule, in the upper right hand corner of the page. After selecting the link, select your programming package, input your zip code, and select Submit. On the next page you will have a list of all channels in your package from your area. If you scroll down the list you can find your NBC channel. All local channels are listed first (channels 2-71).

What is the cost for the Dish Network HD DVR?

User Avatar

Asked by Wiki User

First, it should be noted that all receivers are leased (even those gotten from Best Buy or Costco). The "Lease/Equipment Upgrade Fee" is generally $99 for an HD Receiver and $199 for an HD DVR from Directv themselves (not counting install or delivery & handling). That being said, depending on promotions running in a given month or whether or not you are an existing customer can change this pricing.

Can you hook up a DVD player to a TV that has only a cable input?

User Avatar

Asked by Wiki User

You have to buy a box that converts the signal from the DVD player into an RF signal. These can be found in the electronics department of most stores, or at Radio Shack.

What channel is A Haunting on using dish network in the USA?

User Avatar

Asked by Wiki User

It looks like The Haunted is aired on The Animal Planet, which is channel 184 on DISH Network. You can do a search on your receiver to find the dates and time when the program will be shown.

What is the difference between Dish Network and cable network?

User Avatar

Asked by Wiki User

cable tv is expensive

cable tv has a fixed number of transmitted signals

with cable tv, the number of channels lowers the quality of picture and sounds

cable tv is expensive