answersLogoWhite

0


Best Answer

== == My pool is about 15 yrs old. It is 15,400 gal, with a 600 gal spa next to it, and they both run off the same 1.5hp pump. Works great. In my case, the spa dumps excess water into the pool, so I keep the pool & spa returns open all the time and the overflow eliminates worrying about balancing the water flow. Jim. Our pool is 20000 gal and a spa next to it with 1000 gal both operated by a 2 hp Jacuzzi brand pump for the last 10 yrs, also 5 solar panels on the roof for heating....works great

corys530

User Avatar

Wiki User

16y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

Generally...no. In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.

This answer is:
User Avatar

User Avatar

Wiki User

16y ago

If the pump is big enough and the pipe work is done corectly there should not be any problem with it.

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

Yes but only if flow rates, sizing and a few other factors are worked in to the equation.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

no well pumps are for wells, hence title. pool pumps are for pools. noob.

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

You might find the spa filter to be too small. The spa pump would be strong so you would need to have an appropriately sized filter to handle the flow-rate.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can a well pump be used for a pool pump?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Will chlorine ruin a well pump Example Using the well pump for a pool The pool is about 5000 gallons...?

its a low volume high preasure pump. there no good for a pool they dont have the flow and if is a cast iron pump it will bleed , so you will have rust streaks. but if its all ya got go with it.. your pool pump repair guy in longwood fl


Hayward Pool Pumps?

form_title= Hayward Pool Pumps form_header= Swim a lot with Hayward pool pumps. What is the square footage of your pool?*= _ [50] Would you like to buy a new or used pump?*= () New () Used Are you willing to install the pump yourself?*= () Yes () No


Why does pool pump not pump?

is it on


Can you replace a shallow well pump with an above ground pool pump and will it have enough suction lift to lift the water 20ft?

Above ground pool pumps are made to sit at or below the water level, not to pull water up. If placed above the water level, or away from the pool-side they will not circulate the water properly and may not even prime. For your well, a better option is to go for an in-ground pool pump - or better still, purchase a pump made for your particular application.


Can a regular pool pump be used on a intex pool?

Yes it can but you have to be good at figuring out what fittings and valves you need from the local hardware store.


What is a submersible well pump used for?

A submersible well pump is a pump that is used for pumping water from wells. There are websites that offer submersible well pumps for sale if you need one.


Will a booster pump help heat the pool with gas heater on?

No. generally a booster pump is used to run a pressure side cleaner.


Do pool pump make a griding noise when running?

there is probably something in the pool that got into the pump


Can an in ground pool slide be used for an above ground pool?

Generally...no. In simplest terms, an above ground pool pump is a flooded suction pump, which means the water level must be higher than the pump for it to operate, and an inground pump has the ability to draw water up from a level lower than the pump. The engineering and structure of these two different types of pumps is what makes them work the way they do. This means that, in a typical installation, you could use an inground-specific pump on an above ground pool, but not an above ground pump on an inground pool with the water level below the pump.


What specifically is a heat pump?

A heat pump is somethign that heats water. It can be used to heat your water at home with your shower or you can have a heat pump to heat your pool at home or work


Can you use a salt water pump on a pool that was previously used with a regular water pump?

Yes it wont make any difference at all.


What is the furthest distance from the pool that you can install the pool pump and filter?

I would say 10 yards easy. if the ground is flat.. if the pump is lower that the pool ? it may take a bigger pump ..use pvc. and never use tread tape on a plastic pump ! your pool pump repair guy in longwood fl.