assuming this is a 12 volt system....45 amps.
30amp fuse
30
The Full load current of that amp is approx. 17A, but you base you fuse size between the Full load current of your load and the current carrying capacity of the supply cable, if the size or the CCC of the cable is unknown, I would recommend sticking as close to the FLC as possible
Fuses or breakers are used to protect the conductor to the load. A #14 wire conductor is rated for 15 amps. Most home circuitry is done with #14 wire. The minimum size breaker in an electrical panel is 15 amp so it looks like a 15 amp fuse or breaker can be used for a 100 watt light bulb.
As much as someone is willing to psy
Depends on the size of the fuse.
36 watt / 12 volt = 3 amp
The Full load current of that amp is approx. 17A, but you base you fuse size between the Full load current of your load and the current carrying capacity of the supply cable, if the size or the CCC of the cable is unknown, I would recommend sticking as close to the FLC as possible
10 amp will do and be safe.
The equation that you need to use is I = W/E. Amps = Watts/Volts. As you can see there is no voltage stated but when you obtain the voltage value use it in the equation.
Yes I do not see why not as long as the in line fuse does not exceed the power the amp is pulling. You want the fuse to blow instead of the amp so you need a fuse that can only handle 1600 watts or the equivalent to....
Fuses or breakers are used to protect the conductor to the load. A #14 wire conductor is rated for 15 amps. Most home circuitry is done with #14 wire. The minimum size breaker in an electrical panel is 15 amp so it looks like a 15 amp fuse or breaker can be used for a 100 watt light bulb.
As much as someone is willing to psy
It will draw over 18 amps and will blow a 15 amp fuse.
Depends on the size of the fuse.
36 watt / 12 volt = 3 amp
fuse is under the hood by passenger side in fuse box labled as amp is a 25 watt fuse...there is another by passenger door in the vehicle also labled amp
7.2kW shower = 32 Amp fuse = 6 mm2 cable size7.5kW shower = 40 Amp fuse = 10 mm2 cable size8.5kW shower = 40 Amp fuse = 10 mm2 cable size9.5kW shower = 40/45 Amp fuse = 10 mm2 cable size10.5kW shower = 45 Amp fuse = 16mm2 cable size
20 amp a 20 amp fuse