Incandescent light bulbs have filaments which are made mainly from the element tungsten and/or alloys which include tungsten.
<><><>
Tungsten is the metal element used for the filaments in incandescent light bulbs.
Experiments were made with different materials to use as the filament, including natural fibres, pure metals and alloys of different metals, to find the material which had the longest life whilst glowing brightly enough to give out visible light. The metal Tungsten was found to be the best, because of its high melting point (almost 3700 K) and good resistance to electrical current.
For more information see the answer to the Related Question shown below.
Carbonized cotton was originally tried, and had moderate success. However, the material that finally worked the best was a filament made of tungsten, which shone brighter and lasted much longer.
It is made up of Tungsten which have an melting point of 3380 degree Celsius.
The wire inside a light bulb is called a filament. It is typically made of tungsten and emits light when an electric current passes through it, heating it up to produce light.
The filament inside a light bulb is typically made of tungsten, which is a poor conductor of electricity. When electricity flows through the filament, it encounters resistance, which causes the filament to heat up and emit light.
If you are talking about an incandescent light bulb then its called a filament. It is thin so that it has a high level of resistance. Current going through the filament causes it to heat up and give off EM radiation in the spectrum of visible light.
If they were not evacuated of all outside air, the filament will burn up in seconds because the air Will cause Resistance, thus the filament will burn brighter and brigther tyring to burn off the air until it opens. (blown bulb)...
Electric power is put trough a metallic filament inside a bulb that is filled with an inert gas. the filament is surrounded by the inert gas rather then air to stop the metallic filament from oxidizing when it starts to glow as a result of the electricity being run through it. the glowing filament produces the light.
The filament inside a light bulb is typically made of tungsten. When electricity passes through the filament, it heats up and produces light through incandescence.
The inside of a light bulb is called the filament, which is typically made of tungsten. When electricity flows through the filament, it heats up and produces light through incandescence.
The wire inside a light bulb is called a filament. It is typically made of tungsten and emits light when an electric current passes through it, heating it up to produce light.
The first practical light bulb was made up of a filament made of carbonized bamboo that was placed inside a vacuum-sealed glass bulb. This filament would emit light when an electric current passed through it.
The filament inside a light bulb is typically made of tungsten, which is a poor conductor of electricity. When electricity flows through the filament, it encounters resistance, which causes the filament to heat up and emit light.
A light bulb filament is a coiled wire inside the bulb that heats up and produces light when an electrical current passes through it. The symbol for a light bulb filament is usually represented as a zigzag line inside a circle.
Its a coiled tungsten filament.
The temperature of the filament inside a working electric bulb can reach up to around 2,500 to 3,000 degrees Celsius. This high temperature is what allows the filament to emit light and heat up the surrounding area in an incandescent light bulb.
The coiled filament in a light bulb is typically located at the center of the bulb inside the glass envelope. This filament is what heats up and produces light when an electric current passes through it.
A filament.
the wire in your light bulb is a resistor :)
It is called a filament and usually made of tungsten steel.