You can't, it is part of the body computer.
Lock the drivers side door with the key, then unlock.
The factory alarm system can not be disabled or bypassed. Any failure would need repaired.
== == We found it located in behind the right side of dash board, in behind the glove box. For our 1993 Jeep Grand Cherokee Laredo
Put the key in the driver's door (from the outside), and unlock the door. That resets the security system.
When you turn the key off and lock the doors, there will be a red light on the top of the dash that flashes while the alarm arms.
The only way i found to disarm the alarm was to use the back hatch lock. lock it and unlock it a few times with the key. if this doesnt work try the door locks
True
There never was a 1974 Jeep Grand Cherokee.
pull it out of the box to bypass the centrifuge
Yes
Most likely.
It is located in the console on a 95 jeep grand cherokee.
yes, there is a relay. And a fuse too.
== == We found it located in behind the right side of dash board, in behind the glove box. For our 1993 Jeep Grand Cherokee Laredo
it most likely is do to the security system being armed. try taking the key and turning it to unlock the door.
2 feet
Put the key in the driver's door (from the outside), and unlock the door. That resets the security system.
When you turn the key off and lock the doors, there will be a red light on the top of the dash that flashes while the alarm arms.
New battery fixed the problem.