answersLogoWhite

0


Best Answer

There is only one main bearing. It is on the flywheel side and is a plane bearing (not a ball or needle bearing). You have to remove the crankshaft, press the old bearing out and press the new one in. Once the new one is installed, it MUST be checked for proper oil clearance. If it's not correct (tight), it will lock and destroy the rest of the engine. There is only one main bearing. It is on the flywheel side and is a plane bearing (not a ball or needle bearing). You have to remove the crankshaft, press the old bearing out and press the new one in. Once the new one is installed, it MUST be checked for proper oil clearance. If it's not correct (tight), it will lock and destroy the rest of the engine.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

9y ago

You will need to remove the wheel in order to get at the wheel bearing. Remove the axle. The will bearing will slide off. Reverse the process to install the new wheel bearing.

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

You can replace the front wheel bearing, on your Kawasaki Mule 3010, by removing the axle. With the axle Remove the wheel bearing will slide off.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace the main bearing on a 2510 kawasaki mule?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

2000 ford 300 6 cylinder rear main seal change do i need to remove main bearing cap?

You should not need to remove the main bearing cap, in order to replace the rear main seal. The rear main seal will come off without touching the main bearing cap.


How do you replace a 1 piece rear main seal in a 91 4.0 jeep?

A Jeep 4.0L has a two piece rear main seal. You have to remove the oil pan and rear main bearing cap to replace it.


How do you fix oil leak in main bearing seal 1997 Toyota Camry?

You need to replace the oil seal.


How do you replace rear main seal and oil pump on Ram 1500 5.9L?

You can replace the rear Main seal on the oil pump of your Dodge ram 1505.9 L pickup truck by removing the camshaft bearing. Once the bearing is removed the seal can be removed with a seal puller. Reverse the process to install the new seal.


Do you need to pull the 5.8 engine out of your 1993 xlt bronco to replace the rear main seal?

no just the trans and transfercase and loosen the bolts on rear main bearing cap


Where is the main fuse on a Kawasaki 400 Ltd?

The main fuse on a Kawasaki 400 Ltd is located under the seat in the fuse box for most years. Some Kawasaki's have the fuse box located in one of the side panels.


What is the main bearing spec for a Detroit diesel engine?

main bearing whats happens when goin out


Main bearing torque setting for the QD32?

What is the torque for the following Nissan navara QD32 1)main bearing cylinder head 3)conrod bearing 4)fly wheel


How do you replace bearing caps on a 350 are they all the same i lost a bearing cap can i use any bearing cap from any 350?

You can purchase new or used bearing caps, but there is machine work required. If you are talking about main bearing caps, the block will need to be line bored with the new cap in place. If you're talking about a connecting rod bearing cap, the rod will need to be resized with the new bearing cap in place.


Can I replace the left main bearing on my single cylinder Cagiva 600 Canyon without splitting the crankcases?

no you dont have to but it is easier and quicker to split the crankcase


What bearing are needed for rebuilding the Chevy 350?

Cam bearings, Rod and Main bearings. That will be all of the bearings required to replace when rebuilding a 350 engine.


What are the Torque specs 1977 mercruiser 4-cylinder Chevy rod bearing and main bearing?

The rod bearing torque spec from mercruiser is 45 lb there is no spec that i can find for the main bearing caps.