200-300$ a pop
<><><>
A thermocouple is just two wires of different metals, joined at one end. If you know the wire materials for the type thermocouple you want, you can weld the tips together so the cost is in the wire. Fancier store-bought thermocouples can have color-coded wire, insulated junctions and other features that add to the price.
you would need more information to calculate eg length of thermocouple, diameter also the type of thermocouple type R, S or even B, once these parameters are known then the calculation is quite simple.
all that I know is that jewelry, weapons and battle armor contain platinum. The catalytic converters on cars contain platinum also.
Platinum is a chemical element.
because platinum wire loops dont impart any color of it own.... NICHROME wire are also used..
It is a thermometer using the platinum wire as sensor (resistance thermometer); the resistance of the wire is proportional to the temperature. This type of thermometer is used under 600 0C.
You don't, a thermocouple's output is in the millivolt range.
To create a thermocouple one needs thermocouple wire, a means of spot welding the wire, and wire strippers. A thermocouple is used to measure temperature.
A:The best platinum thermocouple can give upto 64mv
You must use thermocouple wire (of the same type as the thermocouple) to extend the circuit. If you switch to a different wire the point of connection between the two becomes a thermocouple junction itself, and the resulting voltage from that junction will skew your reading. You can use any wire to extend a thermocouple connection if you know the temperature of the junction where the thermocouple wire ends--this becomes the reference junction.
One splice that would work is a western splice.
not much, but it will depend on the type of thermocouple
If your ring is gold and you gold wire and if your ring is platinum ring then using platinum wire...
all that I know is that jewelry, weapons and battle armor contain platinum. The catalytic converters on cars contain platinum also.
Platinum is a chemical element.
No. A thermocouple is made from two dissimilar wires. At the junction of these two wires, an electrical signal is generated that is measured in millivolts. If you insert another type of wire, such as copper, then you have introduced another electrical junction. Your signal will be (millivolt from junction 1 + millivolt from junction 2). <><><> Maybe. A thermocouple measures the temperature difference between the sensing junction (where the two different metal wires meet) and the other end of the wire, the reference junction. If you extend a thermocouple with copper wire, you will measure the temperature difference between the junction and the location where the copper extension is spliced on. If the copper splice is the same temperature as the reference junction, or if you can measure the temperature at the splice, then it will be fine. In general, it is better to run the thermocouple wire to the reference junction.
The MAF sensor has a tiny platinum wire in it.
because platinum wire loops dont impart any color of it own.... NICHROME wire are also used..
No