Best Answer

It is a 351c bored 60 over with 6 inch rods and a .4.0 stoke.

Study guides

☆☆

Q: What is a 351c bored 60 over with 6 inch rods and a .4.0 stoke?

Write your answer...

Submit

Still have questions?

Related questions

If my math is correct , just over 311 cubic inches ( using a 3.875 inch bore and 3.250 inch stroke bored out 30 thousand )

If my math is correct , just over 362 cubic inches ( 4 inch bore x 3.5 inch stroke , bored .060 inches )

If my math is correct : using a 4 inch bore and a 3.48 inch stroke , with the cylinders bored .060 , just over ( 360 cubic inches )

377

365 ci

Its a 355 cubic inch

It is about 446 cid

If my math is correct , almost 293 cubic inches ( using a 4 inch bore that is bored out .030 and a 2.87 inch stroke )

If my math is correct , almost 410 cubic inches ( using a 4 inch bore and a 4 inch stroke that has been bored out .040 )

That means the cylinders have been bored out an additional .030 of an inch, I think.

Stoke-on-Trent to Aberdeen is a little over 380 miles.

413 cid