answersLogoWhite

0


Best Answer

I have a 93 Jeep GC. You can put the window back on track but it will certainly come off again. You need a window regulator/actuator. Ive done a lot of research on the web and it seems that most jeeps are having the same issues with the windows. The part is pretty expensive. Someone told me you can use the rollers offf of a sliding screen door instead

User Avatar

Wiki User

16y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

First, you must take off the inner door panel, then you have to loosen up one of the tracks that the window rides on and put it back in place. Then just tighten up the track, and you should be fine.

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

Type of vehicle would help, there are some different ways they work. In general, take the inside panel off. The front track is probably held in place by one or two bolts, top and bottom. You can usually take it loose, get the window in the back track and then the front. Sometimes the plastic rollers at the bottom of the window can break and this lets the window get out of the track. Something became out of line for the window to get out of the track.

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

the regulator is broke how can I get the window up

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

Begin by removing the inside door panel of your Kia. Remove the window track retaining clips. Put the window back on the window track. Secure the window with new window track retaining clips.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you put power window back on track?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Art & Architecture

How to put window on track 2000 Chevy impala?

I have a 2000 impala and my window came off the track afew times. It's the passenger window and the metal guide in the door is rusted and not as stable as it originaly was. So I took off the door panel and unmounted the speaker to loosen the track bolt at the base of the door and put it back together. The cause of the window falling off the track is when the window half or all the way down and someone closes the door that way. It jars the window inward and then unable to go up all the way. I have yet to find the replacement part or even know how much work it is to swap out. This is what I pay professionals for! A one our job for them can take us up to a day to do.


How do you replace drivers rear door quarter window in a vn commodore?

are u talking about the one that's not in the rear door but next to it, if so on the inside of the car undo the seat belt from the panel that surrounds the window remove the long thing panel from the top of the back window then revove the surround from the side window u want to replace, once u do this u will see that there is about 6 or 8 10mm nuts go around them and undo these then simply push the old one out, with the new one clean off all the old sikaflex and put a small bead around the window in the same place and push back in then put everything back in reverse.... hope that helps


Put back seat in 2002 Saturn L200?

How do I put the back seat bottom back in my 2002 Saturn L200? The Mechanic took it out and did not replace it. How do I put the back seat bottom back in my 2002 Saturn L200? The Mechanic took it out and did not replace it.


How do you keep up a car window up until you can get it fixed?

your can try to tape the window up, you can also try to shim the window by placing a piece of cardboard between the window and the door, or you can disassemble the inside of the door and block the window up with a piece of wood.


How to repair the electric windows?

dissasemble the door by removing the door panel. You unbolt the window regulator and or window to reposition window or regulator to get it back on track. Most of the time something bends or breaks to cause a window to get off track.

Related questions

HOW Do you set a power window back on track on a ford focus?

To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.


How do you put a power window of a Chevy blazer back on track?

You will need to remove the inside door panel of your Chevrolet Blazer. Remove the window retaining clips. Put the window back into the window track. Tighten the window retaining clips.


How do you put power window glass back on track?

By pushing the button downwards


How to put drivers side power window back on track?

you cannot put the window "back on track" the window regulator failed and will need to be replaced, good luck. What kind of lame answer is that? Yours might have been - not everybodies is.


How do you place the passenger window back in track on a 1999 Intrepid with power windows?

Remove the inside door panel of your 1999 Chrysler Intrepid. Remove the window retaining clips. Put the window back into the window track. Secure the window with the window retaining clips.


How to realign electric car window to 1997 Grand Prix?

how to put a power window back on track on a 1991 ford f150


How do you repair passenger side power window when it falls off the track?

Take the door panel off and put it back on the track


How do you Put window back on track 2000 jaguar s-type?

To put a window back on track in a 1996 Geo Metro, the door panel will have to be removed. Use a screwdriver to pry up the clips around the door panel. Then locate the window cable and rewind it. If the window is operated by a power switch, be careful not to pinch the fingers when rewinding the cable.


How do you get the passage window back on track on a 1994 Pontiac grand am SE?

Remove the door panel. Find the track, for the passage window, loosen the track and put the glass, back in track. Put the track, back in track, and tighten it down. Put your door panel back on, and your ready to go.


How do you put a driver side window back on track on a 1993 ford thunderbird?

Remove the inside door panel. The entire window mechanism will be visible. Put the window back onto the window track.


How do you put a window back on its roller power window?

If your window has come off its roller you will probably need a new regulator to get it back on the track. Alternatively you can try to fix it by detaching the paneling on your door and trying to get window back on roller.


How do you repair a drivers side power window of a 2001 dodge caravan which has fallen into the door?

Remove the inside door panel. The entire power window mechanism will be visible. Put the window back onto the window track.