0
The slave cylinder is a plunger that releases the pressure on the clutch. When you step on the clutch pedal, fluid is forced into the slave which pushes out a rod that pushes against the fork that then pusher against the pressure plate that is between the motor and the transmission.
Wiki User
∙ 12y ago
Wiki User
∙ 13y agoEither it or the master is bad. Take the line loose on the slave, hold your thumb over the end and have someone push on the clutch. If the master is good, it will force fluid past your thumb. This means the slave is bad. If it doesn't, then it's the master cylinder that's bad. Slave may be also, but one thing at a time.
Add your answer:
Earn +20 pts
Where on the fire wall is the clutch slave cylinder located on a ford f 350 truck?
The slave cylinder is not on the firewall, it is at the transmission. The master cylinder is on the firewall.
Where is the slave cylinder on 1998 gmc sonoma?
Inside the transmission
What could cause a clutch pedal on a 1992 Toyota celica to stick to the floorboard with no loss of fluid and I have already changed the slave cylinder and bled it several times?
If you've changed the slave cylinder and bled it several times, the next step would be to check the MASTER cylinder and if that doesn't work then your clutch is burned out.
Where is the slave cylinder on a 1995 s10?
It is inside the bellhousing. The transmission must be removed to gain access to it.
Where does clutch fluid go?
There is a smaller master cylinder next to the brake master cylinder. The clutch uses brake fluid also. If you mean where does it go if it is low, the slave cylinder on the transmission is probably leaking.
94 ford f350 slave cylinder bleeder?
It has to be on the slave cylinder, not sure that was your question.
Where is the Jeep Wrangler slave cylinder?
how to replace the slave cylinder on a 1993 jeep wrangler
How do you put fluid in the slave cylinder on a 2000 Toyota Tacoma?
Remember, keep the master cylinder full so you don't suck air into the slave cylinder. Then you put the fluid in the slave cylinder.
Where is the bleeder on the clutch slave cylinder?
In cylinder
Where is your slave cylinder?
The slave cylinder for a hydraulic clutch is located inside the manual transmission bellhousing
Do you have a picture of slave cylinder location?
slave cylander for what? slave cylander for what?
What is the purpose of slave cylinder?
The slave cylinder function operates from hydraulic pressure received from the master cylinder when applied. In automotive hydraulics the slave cylinder can operate such functions as the brakes, clutch or any hydraulic operation.
How do i repair the slave cylinder on my 1988 Ford Ranger?
The slave cylinder on a 1988 Ranger can not be repaired. The cylinder will have to be replaced, then the system bled.
What does a slave cylinder do?
it transmits the action from a master cylinder
How do you change internal slave cylinder to an external slave cylinder on a 1993 wrangler?
no none of the answers were my question
Where is the slave cylinder located on 2004 Saturn vue?
where is the slave cylinder located on a 2004 satern vue
How do you replace the slave cylinder in 96 Chevy C1500?
How do you replace a slave cylinder in a 96 chevey k1500
