0
The 1996 Mitsubishi Eclipse ignition module is located on the firewall in the engine compartment. The ignition module will be on the drivers side of the firewall.
Add your answer:
Earn +20 pts
Where is the ignition control module on a 1996 Ford Thunderbird?
It is in the dist.
Where is the ignition control module on a 97 explorer sohc?
Only the EEC-IV ignition systems ( 1991 to 1995) use an external ICM (ignition control module) . From 1996 on with the EEC-V system the ignition control module is incorperated into the power control module (PCM) mounted in your firewall on the passenger side.
What is a ignition control module?
the ignition control module is operated by the pcm,the pcm tells the ignition control module when to energize the coils to enable spark
Where is the ignition control module on a 1994 ford explorer?
From 1991 to 1995 with the EEC-IV system there is an external ignition control module mounted on the radiator support in front of the battery. Remove the battery in order to change the module. 1996 and newer with the EEC-V system, the ignition control module is incorperated into the powertrain control module (PCM) that is visible from the engine compartment, in the firewall, on the passenger side.
Where is and how to you relace ignition control module 1996 Buick Riviera?
In the distributor, buy a new one and read the instructions
Where is the ignition module on a 1996 stratus?
The engine computer is the ignition module.
How do you change the ignition control module on 1996 mercury cougar xr7?
there is no ignition control module on the 1996 model its all through the PCM
Where is the ignition control module on a 1996 Ford Thunderbird?
It is in the dist.
Where is the ignition control module located on a 1996 dodge neon?
Autozone
Where is the ignition control module on an 1996 mercury mystique located?
na/
Where is the ignition control module on a 97 explorer sohc?
Only the EEC-IV ignition systems ( 1991 to 1995) use an external ICM (ignition control module) . From 1996 on with the EEC-V system the ignition control module is incorperated into the power control module (PCM) mounted in your firewall on the passenger side.
How do you change an ignition module on a 1996 LSS?
Remove the 3 coils which are help on by 2 5.5 mm bolts each. The module is now free. Remove electrical connector from ignition module. - Tech JK -----------------------------------
Were is the electronic ignition module at on your 1996 Chevy s10 truck?
If this is the 4.3 engine, it is located on the bracket next to the ignition coil.
Where is the ignition control module located on a 96 Mitsubishi eclipse gst turbo?
It's right behind the fuel trim beside your ignition coil pack
Where is the ignition module on 1996 Buick Century located?
The ignition module is located under the three ignition coils. The same bolts that hold the coils in place also retain the module to the mounting bracket. To find the coils, follow the ignition wires from the front of the engine to where they attach at the rear. The wires clip to the coils.
Where do you find ignition module on 1996 dodge Ram d50 mini pickup?
incorparated in the pcm
Ignition module location 1996 ford thunderbird 4.6?
The Ignition Control Module on a 1996 Ford Thunderbird 4.6 is located inside the EFI or Electronic Fuel Injector. The EFI is the carburetor. Look for a cord that has a connector that resembles an HD Cable.
