0
Only the EEC-IV ignition systems ( 1991 to 1995) use an external ICM (ignition control module) . From 1996 on with the EEC-V system the ignition control module is incorperated into the power control module (PCM) mounted in your firewall on the passenger side.
Add your answer:
Earn +20 pts
Free auto parts interchange?
part interchange? i have a 1994 Honda Civic del Sol SI 1.6L MFI SOHC 4cyl looking for a left front lower control arm
Where is the bank two oxygen sensor on the 1997 Ford Explorer?
On a 1997 Ford Explorer : Bank 2 is the drivers side of the engine ( 4.0 liter EFI V6 , 4.0 liter SOHC V6 , 5.0 liter V8 engines ) Sensor 1 is close to the engine BEFORE the exhaust enters the catalytic converter Sensor 2 is AFTER the exhaust has passed through the catalytic converter
WHAT CAR DOES A STP Air Filter SA7174 FIT?
1992 and 1993 Honda Civics and Civic Del Sols with the 1.5L FI SOHC and the 1.6L MFI engines 1995 Honda Civics and Civil Del Sols with the 1.5L MFI SOHC, 1.5L MFI VTEC SOHC, and 1.6L MFI VTEC SOHC engines 1994 Honda Civic CX, Civic DX, Civic VX, and Civic Del Sol S with the 1.5L MFI SOHC engine 1994 Honda Civic EX, Civic SI, Civic Del Sol, and Civic Del Sol SI with the 1.6L MFI VTEC SOHC engine 1994 Honda Civic LX with the 1.5L MFI SOHC engine 1996 and 1997 Honda Civic Del Sol with the 1.6L MFI VTEC DOHC engine
What is the spark plug gap on a Mazda protege 1.8L sohc 1994?
.045
Will a 2005 4.0 sohc 4x4 Ford Explorer engine work in a 1995 Explorer?
Yes, but not easily. The PCM will need to be changed and the engine harness may be different. If you have a OBDII port under the dash, it won't be too had. HUGE difference in power, well worth the work if you are considering the upgrade. The biggest problem is the PATS key, your old system (in the colum) won't interface, you will have to get a custom tune to bypass the PATS, upgrade the colum or bypass the PATS with a good transponder taped in the colum.
95 2.3 ranger is it equipped with an ignition control module?
Yes ( according to motorcraft.com ) Motorcraft ( DY 959 ) Ignition Control Module for 1995 Ford Ranger 2.3 L - SOHC
Where is the icm located on a 1997 explorer xlt sohc chilton says it is in the left front by radiator mount but unable to find anything close to it any suggestions?
1991 through 1995 Explorers with the EEC- IV system have an external ignition control module in front of the battery mounted on the radiator support. 1996 and newer, the ignition control module is incorperated into the powertrain control module (PCM) for the EEC- V system.. The PCM is mounted in the firewall on the passenger side.
Where is the ignition control for a 1995 Mitsubishi diamante located?
Ignition power control is located on the intake driver side next to intake motor control looks like small module black color. This is for 95 diamante with 3.0 SOHC engine.
Is there a rev limiter in 2002 ranger with 4.0 sohc auto?
Yes , it's part of the Powertrain Control Module
Can you replace a 1998 ford explorer 4.0 SOHC engine with a 1997 Ford Explorer 4.0 SOHC engine?
yes
Where is the Idle Air Control valve located on a 1998 Ford Explorer 6-Cylinder 4.0L SOHC?
On most models, the Idle Air Control (IAC) valve is located on the throttle body.
Can a 1999 Ford Explorer sport v6 sohc run on ethonal?
On a 1999 Ford Explorer Sport , 4.0 liter SOHC : No , " regular " unleaded gasoline , 87 octane is recommended
Location of cam position sensor on 1998 Ford Explorer 4x4 4.0 sohc?
where is the cam shaft position sensor on a 98 ford explorer 4x4 4.0 sohc 4x4
What is the cam type of the 2008 Ford Explorer?
The 2008 Ford Explorer has single overhead cam (SOHC).
What is the cam type of the 2002 Ford Explorer?
The 2002 Ford Explorer has single overhead cam (SOHC).
What is the cam type of the 2007 Ford Explorer?
The 2007 Ford Explorer has single overhead cam (SOHC).
What is the cam type of the 2001 Ford Explorer?
The 2001 Ford Explorer has single overhead cam (SOHC).
