See related answers
UNDER THE COIL PACKS
It is on the evaporator case and is held in with 2 screws.
The crankshaft sensor on a 2 door Honda Accord with a 3L V6 engine is located on the side of the engine, near the oil filter. It screws into the side of the block and outputs the loading of the crankshaft to the vehicle's computer.
Inside the timing chain cover there is a crank position sprocket and a sensor that connects into the side of the timing chain cover. There is also a sensor in the distributor(this is the camshaft position sensor). The connector faces the firewall. To setup your timing you have to rotate the distributor to 0 deg or you will get a P1345 code. A timing light won't help. If you don't have the right equipment you need to take it to the dealer or keep adjusting the distributor until the code goes away. Jon
A two-stroke engine does not have a cam or camshaft. Seeing there is no intake/exhaust valves it would be pointless to have a camshaft.
where is the camshaft position sensor located on a 1999 Oldsmobile intrigue
The Camshaft Position Sensor is located behind the Power Steering Pump.
I have a 98 olds intrigue...the camshaft position sensor is located around the middle polley on the left side of the engine. It has one screw. It's fairly easy to install.
Were. Is the oldsmobile intrigue relay switch. Loocated
where is the crank sensor located on a 2002 Oldsmobile intrigue 3.5
It is located beneath the power steering pump in the engine block
On the 99 Olds Intrigue, the camshaft sensor is located on the rear of the engine. It is just above the starter.
The camshaft sensor on the 99 Olds Intrigue is located on the engine block. It is under the starter, which has to be removed to locate the camshaft sensor.
The 1999 Oldsmobile Intrigue coil pack is located on the firewall, in the engine compartment. The coil pack will be on the passenger side of the firewall.
Behind the glovebox.
where is the starter relay located??
where are the camshaft position