answersLogoWhite

0


Best Answer

The easiest way to reset your car alarm system is to remove the car alarm system fuse. You can also remove the positive cable from the battery. In both cases return the component to its original position after 10 seconds.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

8y ago

This is a highly specialized question. Due to the enormous variety of anti-theft systems, there is no one answer. Check your owner's manual, online at the manufacturers website, or from the dealer/store you bought it at.

many times simply removing the negative cable(black-) from its terminal and reattaching it will reset the alarm and in many cases,your cars computer system.

For my particular car, I had to turn the ignition on for ten minutes, turn it off for five seconds, repeat twice, then, on the third time, turn the ignition on, wait seven seconds, then turn to start. Each car is different. I suggest you go to All-Data. Their web address is http://www.alldatadiy.com . (The 'diy' means 'Do It Yourself'.) This is the site just about all auto repair mechanics use, (even the dealerships,) and it makes a Chilton or Hanes auto manual look like a cartoon book. They cover everything from recalls to bulletins to every aspect of repair you can think of, including the alarm system re-learn procedure. The cost is about $20 or $25 for the first vehicle and about $16 for each additional vehicle and the subscription is good for a year. (Commercial subscriptions are about $150/month, I think.) DEFINATELY worth the cost if you are going to do ANYTHING to your car. See for yourself.

ANSWER: If your having problems with the anti-theft not allowing your 1997 Malibu to start you can jack up your car and jump the starter Then turn key in ignition till starter catches. Leave car running for about 20 min and light will off.

This answer is:
User Avatar

User Avatar

Wiki User

12y ago

Ok, a bit of work is involved in terminating

a factory Nissan alarm system.

Normally, you would insert the key in

the drivers door, turn left, then right

to disarm and reset it. If yours is malfunctioning,

you can disable it for good by doing the following:

The FACTORY ALARM DISARM WIRE IS

white/blue |-| at the door lock switch in

the drivers door. Meter these wires while turning the

key in the driver door key cylinder.

Once Located, splice into this wire with

a similar guage wire, and put it to

a solid chassis ground. This terminates

the alarm functions entirely.

However, at this point, this car would be exceedingly

easy to steel, so I suggest you get an aftermarket

alarm system to protect it from here on in.

Hope you can nail it for the neighbors, (and your)

sake!

ALARMTEK

CARALARMSTORE.com

This answer is:
User Avatar

User Avatar

Wiki User

15y ago

Fix the problem with the alarm.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you reset the anti-theft system if your car will not start?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Art & Architecture

Why are the parking lights flashing and the car won't start after I just replaced the head lamp on my 1994 Ford Probe?

Somehow you set off the antitheft system. In order to reset it you have to unlock the drivers door with the key.


How do you disable the ant-theft system on a 1998 Olds Cutlass?

Turn the key forward for ten min. then shut the key off then try to start it.


How does a chipped ignition key go bad it then sets off anti theft system and car wont start?

Because there are tumblers in the lock where you put the key in. When you put the right key in, all the tumblers are put in the right place and all the sensors are then turned off so the car will start. When all the tumblers are not put in the right position due to a bad key, the sensors stay on so when you turn the key, the cr won't start and the antitheft alarm goes off


How do you deactivate an anti-theft system on my 1996 Chevy cavalier the fuse does not do anything with the theft system light on the car will not start this is factory?

Remove the fuse. smokingallowed say's: Removing the fuse will only erase the memory from the computer,and it will have to relearn what it should know. It will not reset the theft system. Here's how to reset the theft system. Roll the window down,(if power windows,turn the key off again)reach thru the window and try to start the car. When it don't start just leave the key on for around 20 minuets or so. If you dont leave it on long enough you will have to go through this waiting period again, but 20 mins. should do the trick. Then turn the key off for about 30 seconds, then start the car. P.S. Dont do anything electrical,like, push the brakes,open the door,mess with the radio. Just reach through the window to turn the key. I own three z24's... 97'97'99...On 2 of them('97 & '99) the theft system light will flash when it is activated and stop flasing after 20 mins. when it is reset, but the 3rd car('97) theft system light will not flash, just be lit and go off after the car is started.


Your 2002 Chrysler 300m was in an accident and now wont start is there a inertia switch or cutoff that needs to be reset and where is it?

There is not an inertia switch on this car. The fuel system is computer controlled with relays. So you need to stat with checking for codes, check fuses, etc.

Related questions

How do you reset antitheft system on 1995 Lincoln town car?

disactivate the antitheft


89 eldorado will not start?

our Cadillac eldorado won't start because of the antitheft sistem. how to disable the system and start the car


Why are the parking lights flashing and the car won't start after I just replaced the head lamp on my 1994 Ford Probe?

Somehow you set off the antitheft system. In order to reset it you have to unlock the drivers door with the key.


How can i get pass Theft system problems for 96 eldorado so my car can start?

Place the key into the ignition. Turn the key to the auxiliary position, without starting the engine. Keep the key in the auxiliary position for 30 seconds. This should reset your antitheft system.


Does antitheft have to be reset on 2003 Mits Eclipse?

It depends on what you trying to do. If disconnect battery and reconnect it the immobilizer activates automatically. So you will not be able to start the car with key with chip.


How do you deactivate the anti theft system for a 1997 Pontiac sunfire?

My car won't. Start no power to the fuel pump because of the antitheft


How do you start a 96 Saturn when anti theft is activated?

i have a 2001 Saturn sl1 and the anti theft system shut down the car. to reset the antitheft system try to start the car. leaving the key in the on possition disconnect the positive battery terminal (red terminal). wait for about ten minutes, with the key still in the on position this whole time, reconnect the terminal on the battery. then get in the car and turn the key to start. this fixed my problem and hopefully it will help you as well.


Is there a fuse for anti theft on 1996 Cadillac STS?

your car has a passlock antitheft system. there is a resistance value in your key that sends a signal to you cars computer to start the car. i dont believe there is a fuse


If the antitheft system on a 2002 Saturn SL1 has engaged and it will not start how can it be reset?

Try this, put your key in the drivers door and lock it and unlock it with your key. Not the key fob, the ignition key. Then try it. If the steering wheel is locked, jiggle the wheel slightly as you turn the key-- this should release the ignition-lock and allow you to start the car.


How do you reset the alarm system for a Mercury Sable when alarm is causing the car not to start?

to reset the alarm system for a Mercury Sable when the alarm is causing the car not to start, place the key in the ignition. Turn the key only about halfway and leave it in this spot for 10 minutes before trying to start the car.


How do you reset a hornet alarm system?

how to reset hornet alarm,, cause my car can't start..alarm still active,,


How do you reset the alarm system in a 1993 Acura so the car will start?

Contact the dealer.