Yes, but with the provision that there are no problems as seen by the car's computer. Disconnect the negative battery cable for a couple of minutes then reconnect. This will erase any trouble codes stored in the computer. If everything is okay, the CHECK ENGINE light will stay off. If the computer sees a problem, the CHECK ENGINE light will come on again.
First you need to determine why the check engine light came on then make appropriate repairs before resetting the check engine light. Take a drive to your local auto parts store and have them check for codes. They will perform this service at no cost to you. Once you have the codes you or your mechanic can determine what the next step should be.
unhook the battery for about 10 min. should reset
The check engine light on a Mazda CX7 can be turned off by attaching an OBD II code reader. It can both read the engine codes and turn off the check engine light.
fix the problem which is making the light come on in the first place, then disconnect the battery to reset the code
The check engine light on a 2005 Jeep Grand Cherokee looks like this... Here is a link Check Engine Light It looks like a little yellow engine.
The check engine light comes on and stays on when a problem is detected by the self diagnosis system of your vehicle. Generally, a check engine light is lit when there is a problem in the emissions or somthing that is affecting the effectiveness of the emissions.
Reprogrammed, no. The code cleared to turn off a check engine light, yes.
CHECK YOUR SPEEDS SENSORS, FIRST THEN MODULES AND WIRING
check your alternater
The check engine light on a 2005 Jeep Grand Cherokee looks like this... Here is a link Check Engine Light It looks like a little yellow engine.
A flashing check engine light normally means you have a misfire.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Disconnect the negative battery cable for about two minutes and that should reset your check engine light.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Misfire? Due for a tune up? Check engine light on?
You will have to get the engine scanned and the necessary repairs made. Then the check engine light can be cleared. Just to clear the light without the repair will result in the light comming back "on."
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Check engine light. It means there is a problem with the emissions system. Take it to the dealer for repair.
probably u-joints on driveshaft
That is the check engine light.
most common cause, a vacuum leak.