0
How do you remove hub bearing on 1996 jeep Cherokee sport 4.0L?
Wiki User
∙ 12y ago
You would need to remove the brake caliper, brake caliper bracket and also the brake rotor.
The cotter pin and nut that holds the axle in place also needs to be removed, and then the axle needs to be tapped out of the hub with a socket.
Then you can get at the three bolts that hold the hub into place.
An instructional video of this procedure has been listed below to help.
Wiki User
∙ 12y ago
Wiki User
∙ 9y agoRemove the tire and wheel from your Mercury. Remove the axle end cap. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing.
Wiki User
∙ 12y agothere are 3 13mm bolts behind rotor assem. remove brake cylinder rotor look for bolts in between upper lower ball joints near front axel
Add your answer:
Earn +20 pts
What is the front wheel bearing torque spec for 1996 grand Cherokee?
It is 175 ft lbs for the front wheel bearing of a grand cherokee
What does GEN mean on a 1996 Jeep Cherokee sport?
The gen light stays on when the charging system malfunctions.
What size wrench will you need for oil pan drain nut on 1996 jeep Cherokee sport 4.0?
13mm or 14mm
How do you loosen the power steering pump on a 1995 jeep Cherokee sport I LOOSENED THE 2 PIVOT BOLTS ON THE BACK OF THE PUMP AND THEN BACKED OF THE TENSIONER BOLT SO WHY WON'T THE PUMP MOVE?
Assuming the pump is similar to my 1996 Jeep Cherokee Sport, you first need to remove the the pulley with a special tool which you can borrow at an auto parts store. But before doing this, loosen and slide off the the belt off the pump. After removing pulley. remove bolts and pump should slide off. Did this to my jeep recently.
Where is the thermostat is located on a 1996 jeep Cherokee?
The thermostat on a 1996 Jeep Cherokee is under the housing where the upper radiator hose attaches to the engine.
What drivetrains interchange with 96 Cherokee sport?
1996-2000 Cherokee.
What is the front wheel bearing torque spec for 1996 grand Cherokee?
It is 175 ft lbs for the front wheel bearing of a grand cherokee
How do you remove the ignition key that is stuck in a 1996 Jeep Cherokee Sport?
put it into park, i made the same mistake and couldn't get it out for ages!
Will a 1996 Jeep Cherokee sport 4.0 go into a 1989 Jeep Cherokee sport with the 4.0?
It will bolt in, but the intake on the 1996 is different and the cylinder head on the 1996 does not have the temp sensor for the gauge in the same location.
How do you change a 1996 Jeep Grand Cherokee rear wheel bearing?
How do you change a 1998 Jeep grand Cherokee rear wheel bearing you will have to remove housing in rear, break down axel, pull the side you are working on away from the wheel & replace bearing, it also requires a special tool to get into the housing case
How do you set the time order on a 1996 Cherokee sport?
use a pin
Will a 1996 window regulator for a Jeep Cherokee sport fit a 1998 Jeep Cherokee Sport?
yeah it will just make sure u install it right
Will an 2001 leaf spring of a Jeep Cherokee sport fit a 97 Jeep Cherokee Sport?
Jeep Cherokee XJ 1984-1996 should interchange Jeep Cherokee XJ 1997-2001 should interchange
Who do you replace rear wheel bearings on 1996 tercel?
Remove the tire and wheel from your 1996 Toyota Tercel. Remove the end of the axle. Remove the wheel bearing seal. Remove the wheel bearing nut. Remove the wheel bearing. Reverse the process to install your new wheel bearings.
What oil filter should you use in your 1996 Jeep Cherokee Sport?
Hp 2004
Where is the fuel pump located on a 1996 jeep Cherokee sport?
Inside the gas tank.
How do you replace the front wheel bearing on a 1996 Ford F250 4x4?
Remove the tire and wheel. Remove the axle end cap. Remove the wheel bearing retaining nut. Remove the axle seal. Remove the wheel bearing. Reverse the process to install the new wheel bearing.
