you should have a tensioner assembly you can loosen up to get the belt off easier, and to slip the new one on. there should also be a schematic on the frame of your truck right where you lift the hood from. this will tell you the proper route to take with your new belt ;)
Wiki User
∙ 2015-07-15 21:42:17Put the serpentine belt around the pulleys on your 2001 Chrysler LHS. Tighten the serpentine belt by pushing the tensioner pulley to the left. Tighten down the tensioner pulley and the serpentine belt will be tight.
How many cold cranking amp do a 2001 ford ranger needs?
should be one. its a serpentine belt. runs water pump to cool motor, provides power steering, A/C, alternator to power your car and charge battery.
The starter on a 2001 Ford Focus ZX3 is located in the undercarriage on the driver's side of the motor. This part is one of the hardest to change on the Ford Focus because it is so hidden by other parts of the motor.
No more than 5$
not really
how do you change the serpentine belt on a 2001 Rodeo
I need to know if I need a special to to change my serpentine belt on a 2001 Buick Regal
how do i lossen the belt tensioner on a 2001 Hyundai Sante fe to replace the serpentine belt
Will anything happen to the motor if timing belt breaks on a 2001 ford ranger
hi this is peter i have a 2001 chevy blazer and how do i change the encoder motor on the transfer case? thanks
Look in your owner's manuel. It will help you out. And if it doesnt go to this web site: http://www.ehow.com/how_11_change-motor-oil.html This is a good helper.
replace lower ball joint on ford ranger 2001
I don't have the exact car model diagram but try this http://www.gti-vr6.net/library/engine/repl_serpentine_belt_NEW.html
How do you change oil on a 2001 sportster 1200
How_do_you_replace_a_blower_motor_resistor_in_a_2000_Grand_Am_GT
how do you replace a wiper motor in a 2000 jetta?