answersLogoWhite

0


Best Answer

I found your question while trying to find the same answer for myself. This was my solution. It is not hard to reach the socket. If you haven't changed it as yet. look under the front end and to the side where the light is not working. You should be able to see and locate the standard twist socket for the turn signal light. I fumbled with it for a few seconds and managed to turn the socket and pull it out. There is ample electrical wiring to be able to remove the bulb with ease. When you have pulled out the socket to where you can change the bulb, pull it out, and replace it. Before you replace the socket into its location, try your turn signal to make sure the light is flashing. Then reverse the procedure and replace the light socket by inserting it and turning it into its locking position. This really sound too simple but I couldn't find anything in writing about it. I found your question while trying to find the same answer for myself. This was my solution. It is not hard to reach the socket. If you haven't changed it as yet. look under the front end and to the side where the light is not working. You should be able to see and locate the standard twist socket for the turn signal light. I fumbled with it for a few seconds and managed to turn the socket and pull it out. There is ample electrical wiring to be able to remove the bulb with ease. When you have pulled out the socket to where you can change the bulb, pull it out, and replace it. Before you replace the socket into its location, try your turn signal to make sure the light is flashing. Then reverse the procedure and replace the light socket by inserting it and turning it into its locking position. This really sound too simple but I couldn't find anything in writing about it.

User Avatar

Wiki User

โˆ™ 2007-11-04 18:52:16
This answer is:
User Avatar
Study guides

Where I can purchase purchase HID Fargo ID card in Dubai

โžก๏ธ
See all cards
3.33
โ˜†โ˜…โ˜†โ˜…โ˜†โ˜…โ˜†โ˜…โ˜†โ˜…
3 Reviews

Add your answer:

Earn +20 pts
Q: How do you change a front turn signal light in a 2000 Pontiac Sunfire?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace the front turn signal light bulb on a 2004 Pontiac Grand Prix?

pictures of how to change front signal bulbs on a 2004 grand prix pontiac


How do you change front turn signal on 2006 Pontiac Montana?

You can change the front turn signal, on your 2006 Pontiac Montana, by removing the retaining nuts. Remove the wiring harness. The turn signal will come free. Reverse the process to install the new turn signal.


Does 1995 sunfire have front wheel drive?

Yes , a 1995 Pontiac Sunfire is a front wheel drive vehicle


What is size is the front speakers in a 2005 Pontiac sunfire?

4x6


Is the 2005 Pontiac sunfire front wheel drive?

yes


Will a Chevy Cavalier and Pontiac sunfire hood interchange?

you would have to change the bumper and fenders on your sunfire to get the hood to fit but to start off u would have to change the front bumper clip to interchange bumpers


How do you replace the front turn signal bulb located on a 1996 Pontiac Sunfire GT?

take the wheel well out first then reach in and turn bulb socket


How do I change the front signal light on 2001 Sunfire?

In order to change the signal light, you need to look under the bumper. There are 5 to 6 bolts that need to be removed in order to remove the cover.Ê


Which plug is cylinder 1 on a 1999 Pontiac sunfire?

Try Front Left.


Is a 2001 Pontiac Sunfire a front wheel drive?

Yes, as are all the Sunfires.


Where is the ecu located at on 1998 Pontiac Sunfire?

In the area in front of the right front wheel below the headlight.


How do you change the front signal light bulb on a 1993 Pontiac Grand AM?

underneith the front bumber twist counter clockwise replace bulb

People also asked