0
Maybe, it depents on the brand of gasket you are using, Victor Reinz makes a 350 specific gasket, most others brands are actually the larger bore (about 4.20-4.30) 389-455 gaskets. Measure the cylinder opening on the gasket. The 389 has a 4.060 bore the 350 is only 3.88. Make sure the gasket opening is at least 4.060 so it does not hang into the bore of the 389. If it does it will fail VERY quickly. The easiest way is to just set the gasket on the 389 block and see if it is the same or slightly larger than the 389's bores. Otherwise the gaskets are the same. The Felpro 1016 is a very good gasket for Pontiac 389-455 up to about 12.5:1 compression. after that Cometics are a good idea.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How to change a head gaskets 1992 Chevy 350?
Remove the cylinder head from your 1992 Chevy 350 cubic inch engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
What HEI Distributors will work in a 1970 firebird 350?
If it is a Pontiac 350, any hei distributor out of any size Pontiac motor up to 1979 will work.
Will a Chevy 350 work in a Pontiac trans am?
Yes
Water in oil 1995 Chevy 350 engine?
head gasket is blown
What is involved with a 350 Chevy intake manifold that is leaking coolant and oil?
You either need a head gasket or intake gasket.
Why do you have oil in your water on 350 Chevy engine?
Because you have an internal crack, most likely in head or head gasket.
How do you Replace head gasket Chevy Suburban?
what is the preceger for replacing the head gaskets on a 1993 chevy suburban 4x4 350
What is the down side to a Chevy 350 head gasket?
There's not one. You can't put them on wrong.
Water in the oil of a Chevy 350 marine engine means what?
intake manifold gasket,head gasket,cracked head,cracked block. was it overheated? was cold water added to hot engine?
Cause of white smoke that evaperates as soon as leaves tailpipe on Chevy 350?
bad head gasket
How much does it cost to replace a 1984 Camaro Z28 350 cubic inch engine blown head gasket?
I'd do it for about $350 - both sides.
Could I swap 301 to 350 in 1979 trans am with any problems?
Which 350?? Chevy or Pontiac? A Pontiac engine will drop right in. A Chevy takes a lot more work.
