0
Why does a Chevy 350 have low compression on adjacent cylinders?
Wiki User
∙ 15y ago
If any two adjacent cylinders have low compression it's probably caused by a blown head gasket.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
350 Chevy not running on all cylinders?
Start by testing the compression. It should be consistent within a few PSI on each cylinder. Any cylinders that have little or no compression probably have a burned valve. If all cylinders are up, check the plugs, wiring and distributor.
Why would the compression be low on 5 cylinders of a 350?
WILL IT STLL RUN ?OR IS IT DEAD ?
What is Compression specs for 1974 nova 350?
Compression ratio on a 1974 Chevy 350 in a Nova was 8.5:1.
350 Chevy compression?
The compression ratio of a 350 Chevy engine usually ranges from 8.0 and 9.0 to 1. This provides a good balance of fuel economy and power.
What is the compression ratio of a 1974 Chevy 350?
8.5 to 1 compression is factory stock.
What would be an average compression test reading for a 350?
150 psi should not vary by more than 10 psi between cylinders
How many cylinders does 1990 Chevy G20 have?
The 1990 Chevy G20 has a 5.7L Small block 350 v8. So It has 8 cylinders :)
What is the compression ratio of a 1968 Chevy 350?
10.5-1
What is the compression for a stock 1972 Chevy 350?
About 8.5 to 1
How many cubic inches are in a Chevy 5.0 engine?
Chevy 305=5.0 Chevy 350=5.7 Chevy 4.3=350-minus two cylinders making it a V6
What if Chevy 350 cylinder compression is 115 psi to 135 psi?
then youre running about 8.5:1 compression
Normal compression pressure on Chevy 350?
150 LBS. per cylinder. If you hace more then 15 LBS. difference between any cylinders the engine will idle rough and not run good.
