0
Although archeologists have found rivet technology going back some 3000 years. Modern Pop Rivets, otherwise known as Blind Rivets, are reported to have been invented sometime in the 1930's by engineers Carl Cherry and Louis C. Huck.
The Pop Rivet was actually developed by The George Tucker Eyelet Co. in Birmingham England in the 1930's. Cherry Rivets are similar but have a small ring that is seated in the head of the rivet when it is formed and the mandrel broken off. Two types of Cherry rivets are the Cherry Lock and the Cherry Bulb.
What else can I help you with?
What is the difference between a pop rivet and a rivet?
The main one being that pop rivets can be attached with a blind spot.
Who invented the drive rivet?
Carl Cherry
What is pop riveting?
Pop riveting is a technique used to join together two pieces of metal or plastic with rivets. A hole is drilled through both pieces of metal, and the rivet is passed through both holes. Rivet pliers are placed onto the pin, and the handles are pulled together, pulling the pin head into the rivet. The pin breaks off, leaving the rivet attached firmly in place.
What is a girder fastener?
The answer is rivet.
What is a rivet nut?
It is a one-piece which is threaded in its interior. Also it has a counterbored tubular rivet. Such tubular rivet can be fully anchored from one side. Two types of rivet nut: One of them is designed in order to form a bulge on the rear side of the panel, the same way that a screw is tightened in its threads. The other type uses also a screw, however it is drawn into the sleeve, instead forming a bulge.
What is name of you?
Pop Rivet.
What is the difference between a pop rivet and a rivet?
The main one being that pop rivets can be attached with a blind spot.
Is the anvil on a pop rivet standard?
Yes, the anvil on a pop rivet is a standard component. It is used to support the rivet while it is being compressed and form a secure joint.
How do you use a pop rivet gun?
to use a pop rivet gun you have to get two pieces of metel and drill 2 holes into the metal
What kind of rivet do you use to reinstall a door lock actuator?
A pop rivet, of course.
What is a tool to make a rivet thicker and shorter?
I assume the rivet you are asking about is a "tinners" rivet and not a more common "blind" rivet (commonly known as a "pop" rivet). If this the case the tool you want is called a "rivet set".
When a pop rivet is set which part of it is discarded?
The stem of the rivet is discarded. It is pulled in to the rivet gun and breaks off at a cetain point.
How does pop rivet gun work?
jimmy
What does a rivet gun do?
It installs rivets. Usually these are pop rivets. The standard rivet tools are air hammers.
Can you use wd40 on a pop rivet gun?
Yes you can.
Who invented the countersink rivet?
Glenn Odekirk,
Who invented the drive rivet?
Carl Cherry
