0
I think they both work pretty well. Don't usually have a choice about which, because the manifolds you have dictate which type of seal you'll use.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is an Exhaust Flange Gasket?
an exhaust flange gasket, is the gasket,commonly called a donut that is used to seal where the exhaust pipe is bolted to the exhaust manifold
How do you fix an exhaust leak around the flange gasket on a Toyota hilux 1994?
It would be best to get a new exhaust gasket.
Type of gasket between exhaust manifold and exhaust pipe?
Metallic donut/metal flange type
Why is exhaust leaking into cab on 1979 Bronco when it has no wholes in exhaust?
I would check the Flange gasket. It is the gasket that sits between your exaust manifold and your exaust pipes
How do you replace exhaust manifold on Chevy 1994 pickup?
Unbolt from the block & take the nuts off studs to exhaust flange. You will need a new gasket for the block & a new one for the flange.
On a 1992 Toyota Paseo what is the gasket called that connects the header to the exhaust system I think its a flange gasket but I'm not sure?
A flange is the part of the pipe that you can bolt on a blow off valve, O2 Sensor, or other parts like that. The name that you are looking for it the Down Pipe Gasket.
How to replace oil pan gasket for Toyota Camry 1995?
Changing the oil pan gasket on a 1995 or similar year Camry is realtively simple, but does require removal of the exhaust pipe. You will need a new oil pan gasket and a new exhaust pipe flange gasket. Put the car on ramps or jacks to access the undercarriage. Remove the exhaust pipe by removing the 3 nuts holding the exhaust pipe flange to the exhaust manifold. These nuts often rust and prior application of penetrating oil may be required to remove them without damage. Once the pipe is unbolted, work the exhaust system loose from the hanging brackets. In most cases the entire system does not have to be removed since there is enough room to remove the pan with only the front hangers removed. Drain the oil from the engine Remove the 10 mm bolts holding the pan to the block. Remove the old gasket material and scrape any remaining gasket from the block and pan. Install the new gasket. Forma-Gasket or a similar product may be used in small quantities to "glue" the new gasket in place and prevent shifting while the pan is reattached to the block. Reinsall the 10 mm bolts in a cross pattern to ensure the gasket is compressed evenly. Do not overtighten the bolts. Replace the pipe to flange gasket between the exhaust pipe and the exhaust manifold with a new part. Reattach the exhuast pipe to the hangers. Install the 3 bolts connecting the pipe flange to the exhaust manifold. Fill the engine with oil. Pray there are no leaks!
How are exhaust stacks attached to the exhaust ports of a cylinder aircraft?
On Lycoming engines the exhaust pipes have a welded steel flange that seats over a copper gasket with 2 studbolts directly onto the outlet port of the engine.
How do you measure a flange gasket?
Diagonally
Does an exhaust gasket need silicone?
No, the exhaust gases are too hot. Generally a collapsible metal gasket is used on exhaust.
What is a flange spreader?
A flange spreader is a device that uses a ratchet, leverage and fulcrum points to spread a bolt together connection. Usually welded pipe to flange, then a seal or gasket, and then another flange, and then welded or threaded pipe carries on. A flange spreader is used to spread the flanges apart to change a gasket or put in a spec blind to blank either side of the connection.
How do you install an exhaust manifold on a Renault?
The exhaust manifold needs to have a gasket in place to help seal the juncture between the manifold and the engine. After the gasket and gasket sealer are in place, tighten the bolts for the exhaust manifold. The exhaust pipe can then be replaced on the new exhaust manifold.
