0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What size jets Keihin carb for a 1987 harley Davidson?
42 pilot 150 main for stock Keihin butterfly carb.
How do you change main jets in carb Yamaha v star 650 2008?
This webpage will be your best friendhttp://www.650ccnd.com/ht.htm
Why won't your 49cc panterra mini bike won't start?
Main jet inside the carb. It's the one that runs in-line with the throttle needle. Remove the carb, disassemble carb, soak in card cleaner, and clean with a toothbrush. As for the jets, shoot carb cleaner through them for 30 seconds a piece, if they are still clogged or you want to make sure they are clean, take a very small drill bit and, by hand, work it through the jets. Reassemble and tune carb. Easy sh*t.
Why is my ktm not getting gas from the carb to the cylinder?
If you are getting gas into the float bowl, I would say your jets are clogged. Take the carb off, pull the idle and main jet out, soak them and blow them out with air. Make sure you can blow through them before reinstalling them in the carb. This should solve your problem.
How do you change the main jet on a VLX 600 carburetor?
Depends on what year the bike is. Well not really, just that earlier years had two carbs meaning twice the work. Most all carbs have screw-in jets. Just remove the carb (fuel hoses and throttle cable linkage), then the float bowl (the bottom of the carb body) and the jets are there for the removing.
What are the stock jets for a 94 yz250 and what carb does it have?
pilot iam running is a 30 pilot,main is 310 ,and the carb is a TM 38mm ss.. stk jetting 350 main ,pilot 40 needle is a 6ej33-61-4 in the 4th clip position pilot air screw 1-1/2 -2 out
Are main jets universal?
No
What is stock main jets on 1978 kz 1000?
your stock main jets were 102.5 @5000' and 105 at sea level
How do you make your Honda CR85 work Its sparking and there is fuel getting into the carburetor you dont think its pistons because its not seized up you have tried draining fuel and putting new stuff?
If you have done all of the above, next pull the carb off and clean it. Pull both the main and idle jets out of carb and clean them. Make sure you can blow through them before reinstalling into the carb.
What is the standard main jet size of an aprilia rs 125 28mm carb?
120 main jet on a 28mm carb
What is the stock jet size of a Toyota 5k engine carburetor?
when i bought my lite ace 1995 GXL model, the stock size carb jets in place were 130 and 160, i suppose this is 1.3mm and 1.6mm respectively. the carb is an aisan model originally fitted to the 5k engine. i have replaced these though with a 120 and 150 size with not much effect on the speed but with a better fuel consumption. some owners i know had have 110 and 130 as their main jets.
How do you change main jet on a ktm 85 carb?
take off the carb. on the botoom of the carb is a bowl take screwsa out and the big jet in the center is the main jet. remove with a flathead screwdriver
