half a quart!
Groundwater, but also bear in mind that there is a possibility that the sediments could compact further as the oil is removed (in which case the "voids" would collapse - or rather never form).
It takes 20000 day to build an oil rig.
because crude oil is mostly found near sea coast. +++ Not necessarily. It's more to take crude-oil brought in, and to export refined products, by ships.
Locating a refinery on the coast allows for easy access for oil tankers to bring oil to refineries. Inland refineries are forced to ship oil via pipelines. While pipelines are a more efficient method of shipping crude oil, a landlocked refinery cannot take advantage of spot cargos of discounted oil.
It is important to maintain the oil levels on any recreational vehicle. A 250 Yamaha Bear Tracker needs 1.6 quarts of engine oil.
Should be located at the lowest point of the engine.
3.2 quarts
Next to foot brake lever there is a 3 allen head bolts remove those oil filter inside
If oil is leaking at the top of the motor on a Yamaha 250 Bear tracker this could be caused by a head gasket or valve seal. To locate the exact source of the leak try removing the bolt near the top of the motor and use degreaser to clean the area. Once the area is clean run the Bear tracker to locate the leak.
The oil capacity for the Yamaha Big Bear 400 is 3.2 quarts. It is recommended you use 10w30 oil in the Big Bear.
how much oil does an yamaha xt500 take
The side of the engine near the oil fill on my 1999 Yamaha Beartracker calls for 1500 cubic centimeters AKA 1500 mL. 1500mL is 1.58503231 (1.6) US quarts. According to the manual, with an oil filter replacement the engine will require 1600mL (1.7 US qt)
Yamalube 20w50 is a good choice & it holds 3L for the Yamaha big bear 350.
yamalube 10w30
3.2 quarts
1 oz. Yamalube comes in several weights, from 5 w 40 to 15 w 50. It all depends on how you ride, and the weather you ride in. Use a search engine for Yamaha Big Bear.