0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Cylinder head tightening sequence for Vauxhall Vectra?
The cylinder had bolt tightening sequence should begin by tightening the head bolts on each end of the head. Tighten the center head bolts. Work towards each end of the head, alternating back and forth.
How do you install cylinder head bolts on a 1996 Saturn?
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
What are the torque settingsand tightening sequence for the cylinder head bolts on a Kia Sedona 2.9?
http://wiki.answers.com/Q/What_are_the_torque_settingsand_tightening_sequence_for_the_cylinder_head_bolts_on_a_kia_sedona_2.9 the cylinder head bolts on a kia sedona 2.9?"
Honda d15b2 head Tightening Sequence?
The Honda had bolt tightening sequence begins with the head bolts on each end of the head. Tighten the head bolts moving to the center, alternating from and to end.
Cylinder head tightening sequence 1990 Toyota Cressida?
Pls let me know the cylinder head bolt tightening sequence for toyota cressida mx83
What is the cylinder head torque specs for a 1995 Ford Escort 1.9 liter Thanks?
Use new bolts. Apply a light coating of engine oil to the threads of the new cylinder head bolts. Install the new cylinder head bolts to the cylinder head. Tighten the cylinder head bolts to 40-60 Nm (30-44 lb-ft). The sequence is to start at the middle bolt on the intake side of the head, then move to the exaust side, then move out to the ends of the head in a criss-cross pattern. Loosen all cylinder head bolts approximately two turns, then retighten the cylinder head bolts to 60 Nm (44 lb-ft). After tightening, turn all bolts 90 degrees, in the same sequence. Complete bolt tightening by turning them an additional 90 degrees, in the same sequence.
What is the torque spec for 1995 dodge spirit cylinder head bolts and what is the sequence of bolt tightening?
45,65,65 ft lbs then 90 degrees.
What is the tightening sequence for head bolts on a peugot 106 1.1?
The tightening sequence for the head bolts on a Peugeot 106 1.1 is to begin at 1 and of the head. Move to the opposite end of the head. Alternate back in forth until you reached the middle.
Cylinder head bolt tightening sequence Toyota tercel 1.5?
head bolt sequence Toyota tercel
Head bolt tightening sequence for Mazda e2000?
Begin by tightening the head bolts on each corner of the head. Next, tighten the center head bolts. Tighten the bolts on each end of the head and move towards the center.
Cylinder head bolts torque Suzuki maruti 800cc?
maruti 800 2002 tightening torques of cylinder head
Where do you find the torque specs for an 87 VW cabriolet cylinder head?
Torquing the '87 Cabrio cylinder head is a three-step operation. Using the correct 12-point socket and - most importantly, following the correct tightening sequence - torque the head bolts to 30 ft/lbs. Next, go back over the bolts in the same sequence and snug them to 44 ft/lbs. A final torque sequence requires all head bolts to be tightened an additional 1/2 turn. Also suggest you invest in both the Robert Bentley and Haynes service manuals for your vehicle. All specifications, torque values and, where necessary, the correct sequence of tightening, are provided.
