It's on the bag
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
For a drop spreader 7, broadcast 5
Spreader settings for Scotts manufactured spreaders are listed on the back of the bag.
A broadcast spreader is used to spread seed, fertilizer or sand over a large area. It is commonly used on farms and is an alternative to using a drop spreader.
If you send an email to Scotts Consumer service they can actually send you the spreader settings you need. You can contact them through their website and they will email your spreader setting. https://www.scotts.com/smg/contactus/contactUs.jsp?navId=page900108&parentId=page900134
There is no direct conversion based on weight per area, because it fully depends upon the size of the granules.
The setting for a EZ Drop Spreader by Republic at a rate of 3.4 lbs per 1,000 sq ft would typically be found in the spreader's manual or on the calibration chart. Generally, for this rate, you might expect to set the spreader at a medium to high setting, depending on the specific model and the type of material being spread. It's important to conduct a test run to ensure even distribution and adjust the setting as needed for optimal results. Always check the manufacturer's guidelines for the most accurate settings.
go to the drop down menu that says "my gaia", and the one that says "account settings" is second to last on the drop down thing.
Turn the wick down as far as it will go. The Flame Spreader will drop down on top of the wick guide, smothering the flame.
1.Go File>New 2.Then set your preferences for document settings then click "OK"
Drop that weapon; drop it now! Let's bake drop cookies.
You can drop the hat with= and you can drop your Weapon with Backspace when you are using that gear.